How to remove G35 Coupe door?
#1
#2
Then headlight
Remove fender liner
To remove the fender
Once fender is removed disconnect harness
Open the door and remove that thing that holds open the door
12mm and the 2 10mm on the door
Then close the door and remove the 4 12mm bolts holding the door which is heavy
Am I right? I just woke up
The following users liked this post:
GOAT (11-13-2017)
#3
Join Date: May 2017
Location: Washington State
Posts: 14,809
Received 2,465 Likes
on
2,157 Posts
Coupe 6MT Premium RAS
You can leave the bumper and fender installed it you have two people to help you. I recommend rolling the window down so you can grab the door frame at the top, the door is about 150lbs with the glass installed. Remove the single bolt for the door check, remove the nuts for both hinges, lift the door away from the hinge studs slightly so you can access the door harness connector, there is a pawl and lever assembly to remove it. It's hard to see with the door installed, get a small inspection mirror to look on the backside of it and you'll see what I mean. There's also a picture in the factory service manual under "body, locks, and security".
The following users liked this post:
GOAT (11-13-2017)
#5
Join Date: May 2017
Location: Washington State
Posts: 14,809
Received 2,465 Likes
on
2,157 Posts
Coupe 6MT Premium RAS
The following users liked this post:
GOAT (01-03-2018)