HELP!! I think I have bad pdu
Spoiler
Sounds like a wet IPDM, it's the big fuse box next to the battery.
Disconnect the battery, disconnect the IPDM, take a picture of the fuse/relay layout on the IPDM, disassemble it COMPLETELY and look for moisture inside it, yes that means take off the back half cover so you're down to the circuit board.
If it's wet put it in a bag of rice to dry it out just like you would do with a wet cell phone, when you reassemble it make 100% sure the front cover snaps on properly.
Then fix the cowl drains so it doesn't spill water on the IPDM, the cowl drain is notorious for plugging up with debris.
Disconnect the battery, disconnect the IPDM, take a picture of the fuse/relay layout on the IPDM, disassemble it COMPLETELY and look for moisture inside it, yes that means take off the back half cover so you're down to the circuit board.
If it's wet put it in a bag of rice to dry it out just like you would do with a wet cell phone, when you reassemble it make 100% sure the front cover snaps on properly.
Then fix the cowl drains so it doesn't spill water on the IPDM, the cowl drain is notorious for plugging up with debris.
Thread
Thread Starter
Forum
Replies
Last Post
gkeylow
G35 Sedan V35 2003-06
6
Dec 16, 2017 03:36 PM





