H&R sway bars shipped.
#16
yea, the rear isn't going to go on from my perspective. My son had football practice tonight and I haven't stopped once today, it's 9pm and I'm just now finally sitting down at home to get some 'me time'. Tomorrow will be the same way so no chance of playing with the install right now. I have pictures of the bars, the numbers on them, etc. off to Kyle at Tirerack who ordered them for me to follow up with H&R to see what's happening. The original H&R part number for the front and rear bars were 70050 and 71050 respectively. Both bars have the numbers 33237 printed on them and that's the only numbers on them. I've tried searching the number on H&R's site with no luck. Maybe it's an internal number, not sure.
#17
#19
well, here's my response thus far from my tirerack representative:
But the problem is, H&R is failing to see that there's a difference in the 07/08 sedan vs. the prev. g35 sedan/coupe/350z. Of course the part numbers going to 'show' correct because right on their site, it's showing the same part number for 03-up G35 and 350z. And I told him this. To appease him, I'm going to pull front, compare with pictures and then attempt to install the H&R front and see how it goes. If it doesn't fit, I'll show with pictures. If it does fit, then I'll move to the rear and do the same.
I would've already done this except I've been crazy busy and my 6 year old son had his first football practice last night and I was out with him until 7:30. Tonight's going to be the same way so no chance of doing it tonight. Tomorrow night is the plan.
They have confirmed that these part numbers(33237) are both correct for front/rear of the sedan. I would make the attempt for install. Give me a call if you want to discuss the details. Let me know if you run into any further issues.
I would've already done this except I've been crazy busy and my 6 year old son had his first football practice last night and I was out with him until 7:30. Tonight's going to be the same way so no chance of doing it tonight. Tomorrow night is the plan.
#20
Originally Posted by sredish
well, here's my response thus far from my tirerack representative:
But the problem is, H&R is failing to see that there's a difference in the 07/08 sedan vs. the prev. g35 sedan/coupe/350z. Of course the part numbers going to 'show' correct because right on their site, it's showing the same part number for 03-up G35 and 350z. And I told him this. To appease him, I'm going to pull front, compare with pictures and then attempt to install the H&R front and see how it goes. If it doesn't fit, I'll show with pictures. If it does fit, then I'll move to the rear and do the same.
I would've already done this except I've been crazy busy and my 6 year old son had his first football practice last night and I was out with him until 7:30. Tonight's going to be the same way so no chance of doing it tonight. Tomorrow night is the plan.
But the problem is, H&R is failing to see that there's a difference in the 07/08 sedan vs. the prev. g35 sedan/coupe/350z. Of course the part numbers going to 'show' correct because right on their site, it's showing the same part number for 03-up G35 and 350z. And I told him this. To appease him, I'm going to pull front, compare with pictures and then attempt to install the H&R front and see how it goes. If it doesn't fit, I'll show with pictures. If it does fit, then I'll move to the rear and do the same.
I would've already done this except I've been crazy busy and my 6 year old son had his first football practice last night and I was out with him until 7:30. Tonight's going to be the same way so no chance of doing it tonight. Tomorrow night is the plan.
If they say no, get them to agree to having your local Infiniti dealer do the install and that they pick up the tab if it does not fit.
#21
Registered User
iTrader: (7)
^+1 why waste your time and energy to help them fix their problem and help em make more money w/o taking their time to the R&D, however if they are right and it does fit then tahts another stiry, though i doubt that the older body mountings would be the same.
Last edited by kool_yaar; 08-26-2008 at 07:27 PM.
#24
Thread
Thread Starter
Forum
Replies
Last Post
FS[NorWest]: 04 OEM Faceplate and CD/Tape Unit
Oregon13
Audio/Video/Electronics
5
03-01-2016 12:06 AM
VatoVazq
Steering & Suspension
15
12-23-2015 10:01 AM