^my 08 sport wheels take the same shank style as the coupe 19s

 

I ordered them from calwheelaccessories.com. $1.75 per lug nut for the newer kind, $1.32 each for the other.

Newer shank style lugs
http://www.calwheelaccessories.com/f...e-mag-lug-nuts

Acorn style lugs
http://www.calwheelaccessories.com/f...acorn-lug-nuts

 

Kvangil thanks for the info bro I appreciate you linking the info for me.

My only question is I have a 07 G35 Journey (if that matters) I had the stock 17" wheels and I bought the 19" M Sport wheels. I am currently using the lug nuts from my old rims on my M wheels. Which lug nuts should I go with option A Shank Style or option B Acorn style. Is Acorn and concial the same thing?


Thanks for the help guys.

 

^ you should definitely use the shank style for the coupe 19s

 

Intgr8r - thanks for the info. but I have the M Sport wheels from the M45 Sedan not coupe.

 

Sorry, I don't recall what seats the M45 wheels have.
You can give Wes_888 a PM, he ran M wheels on his sedan.

Also,
You can tell by looking at the lug nut seat of the wheel.
If shank style, the wheel seat has that same profile.

 

So.... I been using regular lugnuts for 17k... ...

can I buy either one?

Newer shank style lugs
http://www.calwheelaccessories.com/f...e-mag-lug-nuts

Acorn style lugs
http://www.calwheelaccessories.com/f...acorn-lug-nuts

Also, do I have to get new wheel lock? If i do, which one you guys recommend?

Thanks!

 

If I am not mistaken you want to buy the Acorn style (older) not the Shank style (newer which is already on your car).

 

so... I should buy 16x of Acorn style lugs and a acorn wheel lock?

Thanks!

 

Yes I believe so.

 

Can I use OEM Infiniti wheel locks (one for each wheel) with the aftermarket wheels (OZ Ultraleggera), which use conical type lugnuts?

 

hello?

 

You have the 2nd Gen OEM lock nuts, don't you? The ones with the washer will not work properly with wheels that require cone type nuts.
Get tuner lock nuts for your OZ's.

 

I'm glad I was pointed to this thread. I didn't realize there was a difference until I tried to mount aftermarket rims used on a 2006 g35 (with winter tires) on my 08 G35x and the lug nuts wouldn't physically pass through the opening since the washer section of the newer lug nut was wider than the hole on the 06 rim. I went to my local Nissan dealer and picked up the older Acorn conical style and will try them out this week.

 

So I'm still confused. Can I use these on an 07 G35 Sedan Journey with stock rims?

the bigger one not the smaller gorilla ones

The are DGR Suspension ones