so I have been searching and searching and I am having a hard time finding info on the best offset for 20x8.5 forgestar f14s with 245/35/20 tires on a 07 x sedan that will be lowered on eibach springs

 

Low 30's/ High 20's with that drop.

 

what are the offset options?

 

32 . 35 38 40s I'm woried about rubbing and I def don't want the tires and wheels sticking out . I might go with 20x9

 

+32 will look the best. It won't stick out either.

 

thank you for the input

 

so i find out that the miro 19 x 8.5s come in 15 for offset and the 19 x 9.5 in 20.

school me on the whole offset thing and tell me what i should ideally have for offset on my 07 X sedan for a non staggered 19s setup? ;-/

p.s. the ASAs come with Offset: 45mm

 

http://www.worldoneperformance.com/b...-offsets-work/
http://en.wikipedia.org/wiki/Offset_(wheel)
http://www.tirerack.com/wheels/tech/...jsp?techid=101

 

^ thanks scott!

 

after all the searching i have done all i can come up with is nobody is using +32 offset with 20x8.5 wheels and most of the pics i need to see for info dont work on the database. most people are using a +35 or higher with the x sedan in 8.5 wide wheels. please feel free to chime in on this, im not trying to make a 2k dollar mistake u know. what im looking for is a little less then flush all around with a 20x8.5 245/35/20 tire. im going to look at what i have when i decide on wheels and may lower it on eibach at some point

 

i am running 19x8.5 +25 all around and i have an X but i am dropped on BC Coils

Sorry i know the pix are at a bad angle just search for my thread for more pix

 

car looks nice. does it matter that im going to get the forgestar f14 wheels as far as offset?

 

like as in if my my wheel's +25 will be different from another wheel's +25 offset? i dont believe so all offset should be the same because like the links above explained where its measured from.

i believe the +32 or +35 would be your best bet but its only a matter of mm difference and worst comes to worst just slap on some spacers

 

ok so would the safer of the two be the 35 so that i could add a spacer instead of having to machine the wheel?

 

Question would this be different for a G sedan S? I'm thinking of running the exact same setup for my S.