I was having a wierd issue with my driver side window. It would go down automatically but not up. I had to hold the up until window was closed. I checked the boards and wasn't able to find anything regarding this. Or perhaps I wasn't using the proper key words.

I found this online and it worked.

Here's how I did it:

In order to re-program the switch there are a few steps:

(1) Raise the window.

(2) When it's completely closed, hold the switch in the window-up position for 10 seconds.

(3) Lower the window.

(4) When it's completely open, hold the switch in the window-down position for 10 seconds.

(5) Repeat steps #1 and #2.

 

I have had to use this numerous times after I have unplugged the battery for a long time and work on the car. I think only holding about 5-7secs works too.

 

just did it as i replaced battery..works like it should now

 

how many turns do u usually have to do it cause i tried it and it didnt work, i did about 5 rotations

 

tried this, did not work for me ...