New ART Pipes fella here :)
#16
06-28-2011 | 04:58 AM
i have GTM test pipes and the smell is noticeable so there is a smell... if your car is inside of a parking lot and if you leave the car running for about 3-5 minute, you'll definitely notice it.
my CEL is on at the moment. i tried resetting ECU by doing the gas pedal method but it doesnt work so i disconnected the battery and CEL went away but came back on. not sure what i need to do...
my CEL is on at the moment. i tried resetting ECU by doing the gas pedal method but it doesnt work so i disconnected the battery and CEL went away but came back on. not sure what i need to do...
Last edited by _evilMonkey_; 06-28-2011 at 05:03 AM.
#17
06-28-2011 | 05:04 AM
#18
06-28-2011 | 05:12 AM
Thread Starter
|
Registered User
Joined: Mar 2009
Posts: 424
Likes: 5
From: Oman, Muscat
i have GTM test pipes and the smell is noticeable so there is a smell... if your car is inside of a parking lot and if you leave the car running for about 3-5 minute, you'll definitely notice it.
my CEL is on at the moment. i tried resetting ECU by doing the gas pedal method but it doesnt work so i disconnected the battery and CEL went away but came back on. not sure what i need to do...
my CEL is on at the moment. i tried resetting ECU by doing the gas pedal method but it doesnt work so i disconnected the battery and CEL went away but came back on. not sure what i need to do...
as for the smell, like i said b4 it's not an issue here, at least with me
Last edited by Glover997; 06-28-2011 at 05:41 AM.
#19
06-28-2011 | 05:38 AM
Thread Starter
|
Registered User
Joined: Mar 2009
Posts: 424
Likes: 5
From: Oman, Muscat
mate . . there is no comparison between Berk's and Art's
Art's is exactly what u are lookin for, trust me
Last edited by Glover997; 06-28-2011 at 10:00 AM.
#20
07-01-2011 | 12:41 PM
Hi fellas . .
First of all, i'm not used to put reviews here, so plz excuse me if u come a cross with some mistakes. I'll try to cover everything you need to know anyways
I got my package yesterday, and i just installed my pipes immediately, couldn't wait any single minute,lol
NOW GUYS . . IF YOU REALLY WANNA DO GOOD FOR YOUR CARS, THEN YOU SHOULD GET THOSE, IT'S A MUST, THESE ARE THE BEST THING EVER BUILT FOR OUR HR ENGINES !
PERFORMANCE:
I've never experienced such aggressive performance since i started modifying my car. Now With these pipes, I really got the most gain ever, neither my CB nor my tune did provide me this amount of power! I LITERALLY GOT A NOTICEABLE MASSIVE PERFORMANCE, TRUST ME !
FITMENT:
Great ! they do fit our HR sedans and coupes without any single modification.These are built in a unique design, matched with a separated n welded cylinder that would hold the air and release it as a back pressure, now this where the magic and performance come from, good job Tony
Sound:
when i ordered these, i was a bit worried that they may give a louder sound than my HFC, but i was surprised that they do sound as loud as my HFC but with a different nice tone. So you should be fine with your neighbors,lol
Now let's go drama a lil
:
Next morning, i turned my car on, then a CEL popped on all of sudden.
Now i don't really wanna come to a conclusion here or refer it to the pipes design or quality. No not at all . . . these are well designed with good O2 ports built in. but it must be the labors who must of have done a mistake while installing the same . . i've been all the time watching them with
i just didn't feel good about the way they were working.
Anyways. i need ur help now, what do you guys usually do in this case? how can i fix this ?
can i drive the car with a CEL for a couple days ? cuz i'm way far from the city now, and i can only go back within 4 days.
The car cuts in 40km by the way
First of all, i'm not used to put reviews here, so plz excuse me if u come a cross with some mistakes. I'll try to cover everything you need to know anyways
I got my package yesterday, and i just installed my pipes immediately, couldn't wait any single minute,lol
NOW GUYS . . IF YOU REALLY WANNA DO GOOD FOR YOUR CARS, THEN YOU SHOULD GET THOSE, IT'S A MUST, THESE ARE THE BEST THING EVER BUILT FOR OUR HR ENGINES !
PERFORMANCE:
I've never experienced such aggressive performance since i started modifying my car. Now With these pipes, I really got the most gain ever, neither my CB nor my tune did provide me this amount of power! I LITERALLY GOT A NOTICEABLE MASSIVE PERFORMANCE, TRUST ME !
FITMENT:
Great ! they do fit our HR sedans and coupes without any single modification.These are built in a unique design, matched with a separated n welded cylinder that would hold the air and release it as a back pressure, now this where the magic and performance come from, good job Tony
Sound:
when i ordered these, i was a bit worried that they may give a louder sound than my HFC, but i was surprised that they do sound as loud as my HFC but with a different nice tone. So you should be fine with your neighbors,lol
Now let's go drama a lil
:Next morning, i turned my car on, then a CEL popped on all of sudden.
Now i don't really wanna come to a conclusion here or refer it to the pipes design or quality. No not at all . . . these are well designed with good O2 ports built in. but it must be the labors who must of have done a mistake while installing the same . . i've been all the time watching them with
i just didn't feel good about the way they were working.
Anyways. i need ur help now, what do you guys usually do in this case? how can i fix this ?
can i drive the car with a CEL for a couple days ? cuz i'm way far from the city now, and i can only go back within 4 days.
The car cuts in 40km by the way
this is my opinion...you are getting a CEL (assuming its P4120 and P4130) because the air/fuel ratio is off due to the new air flow from the ART pipes. I had berks HFC and when i got my uprev tune, the tuner completely cleared the code, getting rid of the CEL, and adjusting my A/F ratio to where it needed to be. maybe you could do the same. CEL light with still come on only if another problem arises, but not from the ART pipes.
also in for video clip!!!
do you get a slight rattling/hiss sound when you decelerate as most HFC's do?
#24
07-04-2011 | 01:29 AM
Thread Starter
|
Registered User
Joined: Mar 2009
Posts: 424
Likes: 5
From: Oman, Muscat
^
OBD-Codes.com:
Ok
Now which one is this ? Driver or passenger side ? and which one of them . . is it the one that fixed in my art pipes or the one on headers ( the upper one ) ?
my dealer told me it's the one on headers . . is that true ? he also told me it's on the passenger side . . WTF, from what i can tell it's on driver's side ! what do u think ? i'm totally confused . . i don't wanna end it up with replacing em all, following them one by one
someone should confirm before i go penniless
OBD-Codes.com:
With that said, a common fix for this DTC is to replace the air/fuel (O2 oxygen) sensor #1 on bank 1
Now which one is this ? Driver or passenger side ? and which one of them . . is it the one that fixed in my art pipes or the one on headers ( the upper one ) ?
my dealer told me it's the one on headers . . is that true ? he also told me it's on the passenger side . . WTF, from what i can tell it's on driver's side ! what do u think ? i'm totally confused . . i don't wanna end it up with replacing em all, following them one by one
someone should confirm before i go penniless
Last edited by Glover997; 07-04-2011 at 03:45 PM.
#26
07-05-2011 | 03:30 AM
Registered User
Joined: Apr 2009
Posts: 479
Likes: 13
From: Ukraine, Kharkov
omg, just go to the trusted dealer and let him do diagnostics
you might need to replace O2 sensor or just make some additional foulers
anyway u should re-do your Uprev tune to match the AFR in the new conditions and they can eliminate this error forever (of course, if O2 sensors work correctly)
you might need to replace O2 sensor or just make some additional foulers
anyway u should re-do your Uprev tune to match the AFR in the new conditions and they can eliminate this error forever (of course, if O2 sensors work correctly)
#27
07-05-2011 | 07:05 AM
Thread Starter
|
Registered User
Joined: Mar 2009
Posts: 424
Likes: 5
From: Oman, Muscat
^
yea . . upgrading my current tune wud be my next step, but first i need to know which sensor is this, so that i can replace it before i go for upgrading ?
Dealer i went to, is a trusted from what i can tell, but still i need to match their thoughts with you guys for more confirmation.
so . . ?
yea . . upgrading my current tune wud be my next step, but first i need to know which sensor is this, so that i can replace it before i go for upgrading ?
Dealer i went to, is a trusted from what i can tell, but still i need to match their thoughts with you guys for more confirmation.
so . . ?
Last edited by Glover997; 07-05-2011 at 03:47 PM.
#28
07-05-2011 | 11:54 AM
Registered User
Joined: Oct 2008
Posts: 184
Likes: 13
From: Minnesota
^
OBD-Codes.com:
Ok
Now which one is this ? Driver or passenger side ? and which one of them . . is it the one that fixed in my art pipes or the one on headers ( the upper one ) ?
my dealer told me it's the one on headers . . is that true ? he also told me it's on the passenger side . . WTF, from what i can tell it's on driver's side ! what do u think ? i'm totally confused . . i don't wanna end it up with replacing em all, following them one by one
someone should confirm before i go penniless
OBD-Codes.com:
Ok
Now which one is this ? Driver or passenger side ? and which one of them . . is it the one that fixed in my art pipes or the one on headers ( the upper one ) ?
my dealer told me it's the one on headers . . is that true ? he also told me it's on the passenger side . . WTF, from what i can tell it's on driver's side ! what do u think ? i'm totally confused . . i don't wanna end it up with replacing em all, following them one by one
someone should confirm before i go penniless
The following users liked this post:
GXXXV X (08-02-2011)
#29
07-05-2011 | 03:37 PM
Thread Starter
|
Registered User
Joined: Mar 2009
Posts: 424
Likes: 5
From: Oman, Muscat
thanks a lot . . thats exactly what i wanted to hear
Now believe it or not. . this sensor costs 363$
i should of have handed it over to a trusted shop for installation.
Bastards were hammering anything stands on their faces while installing ma pipes
They must of touched the sensor so bad i've learned ma lesson anyways
^
i'll keep u updated . .
Last edited by Glover997; 07-05-2011 at 03:54 PM.
#30
07-06-2011 | 12:26 AM
