How to change interior light bulbs in doors?
#1
How to change interior light bulbs in doors?
I was wanting to put some bright LED bulbs in the doors but I don't see anyway to get to the bulb short of taking the inside panel of the door?
Same goes for overhead lights in the headliner in back seat. Surely you don't have to take the headliner out to change these?
FYI, I got the LED bulbs for the license plate. Those were easy. Bulb holders just snap out, only took a few minutes to change them.
Same goes for overhead lights in the headliner in back seat. Surely you don't have to take the headliner out to change these?
FYI, I got the LED bulbs for the license plate. Those were easy. Bulb holders just snap out, only took a few minutes to change them.
#5
Originally Posted by Garnet Canuck
No prob, it's on page 100 & 101 and it looks very easy to change.
"Insert any appropriate tool into the gap between the lens, remove the lens..."
What's an "appropriate tool"? Sounds like they are saying to just pry the lens off with something like a butterknife?
#6
Originally Posted by Railgunner
Hmmm... well I'm confused... manual says
"Insert any appropriate tool into the gap between the lens, remove the lens..."
What's an "appropriate tool"? Sounds like they are saying to just pry the lens off with something like a butterknife?
"Insert any appropriate tool into the gap between the lens, remove the lens..."
What's an "appropriate tool"? Sounds like they are saying to just pry the lens off with something like a butterknife?
#7
Join Date: Sep 2006
Location: San Francisco/San Mateo
Posts: 1,031
Likes: 0
Received 2 Likes
on
2 Posts
Trending Topics
#8
#9
OK... got the front maplight covers off... with a butter knife. The White LED's look awesome. Pure blue white compared with the yellowish OEM bulbs.
Note of warning... the factory bulbs get to about 500 degrees in 5 seconds
when they are on, don't try and pull them out with your fingers like I did...
Now for the back seat lights over the doors. These I'm still pondering. There's zero "gap" around the edge of the lens. A butterknife won't fit.
Going to try an eye glasses screw driver in a minute.
I'm using the same LED bulbs someone posted for the license plate bulbs
(got them off EBAY). They seem to work for the other bulbs too.
Note of warning... the factory bulbs get to about 500 degrees in 5 seconds
when they are on, don't try and pull them out with your fingers like I did...
Now for the back seat lights over the doors. These I'm still pondering. There's zero "gap" around the edge of the lens. A butterknife won't fit.
Going to try an eye glasses screw driver in a minute.
I'm using the same LED bulbs someone posted for the license plate bulbs
(got them off EBAY). They seem to work for the other bulbs too.
#11
#12
Got them here... 10x pack for 29.99
10x will do license (2x), front map lights (2x), rear lights in headliner (2x)
and lights at bottom of front doors (2x) with 2x left over...
http://cgi.ebay.com/ebaymotors/ws/eB...m=150092696549
OK... the eyeglasses screw driver popped the back seat headliner lens off with no problem. Now to the lights on the bottom of the front doors...
10x will do license (2x), front map lights (2x), rear lights in headliner (2x)
and lights at bottom of front doors (2x) with 2x left over...
http://cgi.ebay.com/ebaymotors/ws/eB...m=150092696549
OK... the eyeglasses screw driver popped the back seat headliner lens off with no problem. Now to the lights on the bottom of the front doors...
#13
Originally Posted by Railgunner
Got them here... 10x pack for 29.99
10x will do license (2x), front map lights (2x), rear lights in headliner (2x)
and lights at bottom of front doors (2x) with 2x left over...
http://cgi.ebay.com/ebaymotors/ws/eB...m=150092696549
OK... the eyeglasses screw driver popped the back seat headliner lens off with no problem. Now to the lights on the bottom of the front doors...
10x will do license (2x), front map lights (2x), rear lights in headliner (2x)
and lights at bottom of front doors (2x) with 2x left over...
http://cgi.ebay.com/ebaymotors/ws/eB...m=150092696549
OK... the eyeglasses screw driver popped the back seat headliner lens off with no problem. Now to the lights on the bottom of the front doors...
The shipping prices to Canada are a little steep.
#15
Originally Posted by ChristianN
If you had to pay $46 would you still order them?
The shipping prices to Canada are a little steep.
The shipping prices to Canada are a little steep.
I really like the license plate LED's on the Lexus IS350 ... so we'll see.
Railgunner - I'd like to see pics of the inside and license plate when you're done (w/ no flash of course).