V36 General Tech Questions Questions and Posts that Do Not fit under the other Tech catagories

Wheel Fitment questions

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jul 3, 2008 | 05:30 PM
  #1  
CantSeeMe-G's Avatar
Thread Starter
|
Registered User
Joined: Dec 2007
Posts: 61
Likes: 0
From: SoCal 310-323
Question Wheel Fitment questions

Some guy is selling a set of 20" rims, 9" wide in the front, 10" in the back, with Yoko AVS ES100 245/35 + 275/30. tires, Will these fit on my 08 sedan without any rubbing? also will dropping it make a difference?

any help is greatly appreciated... thanks

edit: offset is 25+ all around, not sure if im gona lower it or not, depends on how it looks, or which way itl fit better.
 

Last edited by CantSeeMe-G; Jul 3, 2008 at 05:44 PM.
Reply
Old Jul 3, 2008 | 05:38 PM
  #2  
Wei's Avatar
Wei
Registered User
Joined: Aug 2007
Posts: 421
Likes: 0
need to know the offsets, and need to know if you're planning to lower it, makes all the difference
 
Reply
Old Jul 3, 2008 | 05:44 PM
  #3  
CantSeeMe-G's Avatar
Thread Starter
|
Registered User
Joined: Dec 2007
Posts: 61
Likes: 0
From: SoCal 310-323
25+ all around
 
Reply
Old Jul 3, 2008 | 06:48 PM
  #4  
Wei's Avatar
Wei
Registered User
Joined: Aug 2007
Posts: 421
Likes: 0
def need to lower and camber it out,

my opinion, the 275's in the rear most likely will rub
 
Reply
Old Jul 3, 2008 | 09:34 PM
  #5  
Pie-rat's Avatar
Registered User
Joined: Nov 2007
Posts: 105
Likes: 0
with +25 offset they are going to be WAY outside the wheel well. Rear will probably be okay, but the front is where you may run into some rubbin!
 
Reply
Old Jul 3, 2008 | 10:12 PM
  #6  
heyitsalex's Avatar
Registered User
iTrader: (1)
Joined: Mar 2006
Posts: 637
Likes: 3
fronts will actually sit FLUSH!!! The rears will stick out about 15mm. Go +35 in the rear.
 
Reply
Old Jul 4, 2008 | 09:21 PM
  #7  
Borna's Avatar
Registered User
iTrader: (2)
Joined: Dec 2007
Posts: 1,328
Likes: 3
From: Dubai
Fronts would need quite a bit of negative camber and the rears would rub.
I think a nice balance between an agressive look and practicality would be 8.5" +30 and 10" +40. Any opinions on this?
 
Reply
Old Jul 5, 2008 | 03:10 AM
  #8  
heyitsalex's Avatar
Registered User
iTrader: (1)
Joined: Mar 2006
Posts: 637
Likes: 3
^^ +1000
 
Reply
Old Jul 5, 2008 | 04:23 AM
  #9  
Borna's Avatar
Registered User
iTrader: (2)
Joined: Dec 2007
Posts: 1,328
Likes: 3
From: Dubai
^ can you post a pic of your car from before and after you installed the spacers? That's almost the exact specs I was talking about
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
G35Sask
Intake & Exhaust
16
Aug 5, 2015 10:17 PM
IEMaestro
20 Inch
0
Jul 30, 2015 04:30 PM
joedaddy1
Engine, Drivetrain & Forced-Induction
0
Jul 28, 2015 02:58 PM
Detailed Image
Care & Detailing
0
Jul 24, 2015 12:31 PM
Soumilg
G35 Coupe V35 2003 - 07
4
Jul 18, 2015 12:33 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:00 PM.