V36 General Tech Questions Questions and Posts that Do Not fit under the other Tech catagories

starting up problems?

Old Aug 10, 2008 | 05:54 PM
  #1  
Mongkey007's Avatar
Thread Starter
|
Registered User
Joined: Jul 2008
Posts: 201
Likes: 0
From: Tulsa, OK/St. Louis, MO
starting up problems?

this is the 2nd time its happened to me and im starting to worry.. when i turn my car on from a cold start (from the night before), the car turns on and then idles higher than normal (1300-1500).. and then today my clutch wasnt working.. i was pressing it all the way down but no movement in the shifter.. so i turned the car off and then turned it back on and the problem was solved.. but i was wondering why this was happening? btw i put my car into 2nd gear after i turn it off and put it into neutral before i turn it on (to keep the car from moving if anything did happen, just an extra precaution)
 
Reply
Old Aug 10, 2008 | 10:28 PM
  #2  
Mongkey007's Avatar
Thread Starter
|
Registered User
Joined: Jul 2008
Posts: 201
Likes: 0
From: Tulsa, OK/St. Louis, MO
no one? bump
 
Reply
Old Aug 11, 2008 | 02:34 AM
  #3  
Mongkey007's Avatar
Thread Starter
|
Registered User
Joined: Jul 2008
Posts: 201
Likes: 0
From: Tulsa, OK/St. Louis, MO
anyone?
 
Reply
Old Aug 11, 2008 | 11:44 AM
  #4  
trey's wife's Avatar
My horns hold up my halo
Staff Alumni
iTrader: (2)
Joined: Jun 2005
Posts: 8,185
Likes: 0
From: Alabaster, Alabama
OK, I'm not sure I understand your problem. Does the idle not go down after about 60 to 90 seconds? It is normal for it to idle high to start with but it should drop to around 1K to 1200 after about a minute and a half.

As for the clutch - what do you mean, no movement in the shifter? Are you meaning it wouldn't go into gear or that you couldn't move the shifter? Have you had any other issues with shifting or getting into 1st gear at a stop? It could be a problem with the master or slave cylinder but from what you said, I'm not sure. Can you be more specific in your descriptions?
 
Reply
Old Aug 11, 2008 | 11:47 AM
  #5  
Scooby24's Avatar
Registered User
Joined: Jun 2008
Posts: 389
Likes: 3
From: Overland Park, KS
Originally Posted by Mongkey007
this is the 2nd time its happened to me and im starting to worry.. when i turn my car on from a cold start (from the night before), the car turns on and then idles higher than normal (1300-1500).. and then today my clutch wasnt working.. i was pressing it all the way down but no movement in the shifter.. so i turned the car off and then turned it back on and the problem was solved.. but i was wondering why this was happening? btw i put my car into 2nd gear after i turn it off and put it into neutral before i turn it on (to keep the car from moving if anything did happen, just an extra precaution)
Must have been awhile since you had a new car. All new cars, when cold, will start and idle higher to warm up the engine and o2 sensors quicker. After 30 seconds or so the idle will start to drop back to normal.

As far as the clutch, if you have an 07, it might be the clutch system recall.

Edit: Would have helped if I looked at your sig. 2008's shouldn't have the clutch problem. You may have a faulty master or slave cylinder. Air in the line would prevent the clutch from disengaging and you wouldn't be able to get it into a gear.
 
Reply
Old Aug 12, 2008 | 02:31 AM
  #6  
Mongkey007's Avatar
Thread Starter
|
Registered User
Joined: Jul 2008
Posts: 201
Likes: 0
From: Tulsa, OK/St. Louis, MO
thx for the idle info.. i will look into tat tomorrow.. as for the clutch.. it wouldnt go into gear at first.. until i restarted the car.. i havnt ran into this problem again so i guess its ok.. oh and its the first new car ive driven.. lol.. i always drove an used car..
 
Reply
Old Aug 12, 2008 | 11:51 AM
  #7  
trey's wife's Avatar
My horns hold up my halo
Staff Alumni
iTrader: (2)
Joined: Jun 2005
Posts: 8,185
Likes: 0
From: Alabaster, Alabama
That's pretty weird about not going into gear but if it doesn't do it again, don't worry about it. LOL

Mine made a horrid, scary noise about 2 weeks ago but only for a moment and hasn't done it since so I am trying to just forget it happened.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chinee
G35 Sedan V35 2003-06
21
Jun 10, 2024 07:48 PM
andyg35c1
Engine, Drivetrain & Forced-Induction
1
Aug 29, 2015 03:37 PM
chinee
G35 Sedan V35 2003-06
1
Aug 8, 2015 10:11 AM
D1dphresh
G35 Coupe V35 2003 - 07
13
Aug 7, 2015 06:10 PM
Terry_G35
G35 Coupe V35 2003 - 07
8
Aug 4, 2015 02:38 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 04:42 AM.