V36 General Tech Questions Questions and Posts that Do Not fit under the other Tech catagories

Window Roll Up Module Ploblems..Need Help!!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Aug 27, 2008 | 11:57 AM
  #1  
earth0's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Apr 2008
Posts: 835
Likes: 1
From: NYC
Window Roll Up Module Ploblems..Need Help!!

I Just installed mine KP-Window Roll up Module.and test it.
Ploblem: when press lock twice
- Window Roll-up only approx 4 inches and stop
So i have to repeat pressing lock couple time until it's all completely close.
Any advice would be appreciate.
 
Reply
Old Aug 27, 2008 | 12:23 PM
  #2  
sredish's Avatar
Registered User
Joined: Jun 2008
Posts: 918
Likes: 3
From: Chandler AZ
how much of a pita was the install?
 
Reply
Old Aug 27, 2008 | 12:35 PM
  #3  
earth0's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Apr 2008
Posts: 835
Likes: 1
From: NYC
It's alittle.The most important is you need to becarefully taking off the panal.
Recommended to use mask tape.
Follow DIY KPTech instruction and you will be fine.This link also help.

http://www.kptechnologies.com/forums....php?f=2&t=393

I donno if any 08 G35 sedan ever install this yet.Right now i have disconnect the batterly to reset.Let see if it work. Anyone know how to solve mine ploblems? THX
 

Last edited by earth0; Aug 27, 2008 at 01:01 PM.
Reply
Old Aug 27, 2008 | 09:18 PM
  #4  
KPierson's Avatar
Banned
iTrader: (10)
Joined: Jan 2004
Posts: 3,116
Likes: 6
From: Ohio
Where did you hook up the yellow wire? It sounds like you connected it wrong. If there is 12vdc on the yellow wire while the module is going up it will cause the module to stop.
 
Reply
Old Aug 27, 2008 | 10:41 PM
  #5  
earth0's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Apr 2008
Posts: 835
Likes: 1
From: NYC
Originally Posted by KPierson
Where did you hook up the yellow wire? It sounds like you connected it wrong. If there is 12vdc on the yellow wire while the module is going up it will cause the module to stop.
Holy Sh*t You the BEST!!!!! It's work. I hook it wrong to the other blue.
the sky blue was hiding inside.After i fixed it's work really Great!!!
Thanks a bunch KP. I will get moonroof Module next.
 
Reply
Old Aug 27, 2008 | 10:51 PM
  #6  
sredish's Avatar
Registered User
Joined: Jun 2008
Posts: 918
Likes: 3
From: Chandler AZ
Ok, total time for install and how hard are the wires to get to?
 
Reply
Old Aug 28, 2008 | 07:14 AM
  #7  
KPierson's Avatar
Banned
iTrader: (10)
Joined: Jan 2004
Posts: 3,116
Likes: 6
From: Ohio
Great to hear you got it fixed and it was something simple!
 
Reply
Old Aug 28, 2008 | 09:13 AM
  #8  
earth0's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Apr 2008
Posts: 835
Likes: 1
From: NYC
Originally Posted by sredish
Ok, total time for install and how hard are the wires to get to?
sredish,If you ask me now i would said 1hr.Very easy and simple as KP said.
They are two Blue wire ( 1 Blue and 1 Sky Blue thicker wire )
I just follow the instruction by color.Go for it.Very cool!!
 
Reply
Old Aug 28, 2008 | 09:23 AM
  #9  
snowcrossmxz's Avatar
Registered User
iTrader: (1)
Joined: Dec 2007
Posts: 847
Likes: 3
From: NH
Originally Posted by sredish
Ok, total time for install and how hard are the wires to get to?

1/2 hour maybe, i did mine quick, wires are easy, except for the lock wire that goes to the key hole, smaller hands would help, i have huge paws and i got it done,

im interested in the moon roof too
 
Reply
Old Aug 28, 2008 | 02:31 PM
  #10  
SFLG35's Avatar
FGC President
iTrader: (34)
Joined: Aug 2003
Posts: 11,251
Likes: 16
From: Brandon, FL
hey guys im currently running a groupbuy on all kptechnologies modules.
check them out here:
https://g35driver.com/forums/group-b...ml#post3377808
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dallsinghjr1
G35 Coupe V35 2003 - 07
15
Sep 17, 2023 11:25 AM
DRG35R
Wheels & Tires
19
Jan 31, 2016 07:14 AM
BradMD_96
Engine, Drivetrain & Forced-Induction
7
Oct 6, 2015 09:31 AM
dcsbh1
Brakes & Suspension
0
Oct 1, 2015 03:15 PM
NyCrAzY
Brakes & Suspension
13
Oct 1, 2015 09:19 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 10:59 PM.