Hey guys I was wondering if a +15 offset on 19x9.5 SF Challenges will rub if I used them as the front wheels??? Oh and they are 245/35/19..... Thanks in advance!
there are 350z's running +11 offsets 
(almost) anything is possible
do it!
(almost) anything is possible
do it!
+11 on the front??? Damn that looks like it would rub...
Registered User
+15 will not rub. im running +15 with 255's. im lowered with no finger gap up front. hope this helped.
Registered User
I think youre going to have to get your fenders rolled.
Edit: oh well i guess it wont rub.^^
Edit: oh well i guess it wont rub.^^
Quote:
hey boe, any pics at all???Originally Posted by boe
+15 will not rub. im running +15 with 255's. im lowered with no finger gap up front. hope this helped.
Former G35driver Vendor
fronts won't rub unless you have offsets that extends past the wheel well. its the rear that you have to worry about. with an aggressive drop they have to be rolled for sure.
i'm looking to buy some sf challenges that are:
Front: 19x9.5 +15 (245/35/19)
Rear: 19x10.5 +23 (275/35/19)
will these look good on a 1.1 inch drop all around???
what im most worried about is the rim not lining up with the fender up front...ideally i would want the rim to be just a bit tucked or lined up exactly with the fender but NOT sticking out
Front: 19x9.5 +15 (245/35/19)
Rear: 19x10.5 +23 (275/35/19)
will these look good on a 1.1 inch drop all around???
what im most worried about is the rim not lining up with the fender up front...ideally i would want the rim to be just a bit tucked or lined up exactly with the fender but NOT sticking out
Registered User
^^ ill get you pics sometimes this week. you can run +17 instead if you like,It will sit flush with the fenders. +15 does'nt stick out at all.
Registered User
check out andy's ride...
he's got 9.5 +19 up front... see if that's what you want. obviously +15 with push em out 4 mm.
he's got 9.5 +19 up front... see if that's what you want. obviously +15 with push em out 4 mm.