Why would that be weird? Everyone is saying the G37 has a smaller hub bore than the G35. Think!

 

Didn't they also change the lug nuts and bolts? At least on the new sedan, they went to a 14mm lug with a shank style lug nut. Is this true for the new coupe as well?

 

aftermarket rims usually have lager center bore to git many vehicles... hence hub rings are used...

 

Don't know why you would want the G37 19's over the Rays Engineering forged G35 19's. The Rays forged wheels are lighter and look great and you don't have to worry about offsets and spacers.

 

because we are guys and we are never happy with what we have...

 

^^ Couldn't have said it any better!

 

+100000000

 

Definitely go spacers....as far as the bore thing...I have no clue.
I put the M Sport rims on my car and there was no bore size issue.....ODD that they changed the bore size.

 

ISBIDKWTBYATA = Im Sorry But I Dont Know What The Blank You Are Talking About?

Here is an image of the FRONT HUBS from a G35 Coupe / Sedan and G35 07-08 Sedan / G37 side by side...

BOTH have the same CENTER BORE...

Both Hubs will fit EITHER WHEEL...

NISSAN / INFINITI has used this same center bore as far back as I can look up except for the 4x4 Trucks...

The rear hubs are going to have the same bore since they have the same part number on the Sedan 07-08 and the wheels are the same front & rear on the non-sport...

Why your front wheels are not fitting... I do not know... THey very sell most certinaly should bolt up... They will tucked under... but I do not think the offset is that bad that the tire is hitting the inner spindle...

 

i want to see a g35 with g37 rims i think it would look nice

 

i want to see a g35 with g37 rims i think it would look nice

 

we need update!