Setup:
19x9 (+26) front, 245/35/19 tires

What size spacers would I need to get the front wheels of my coupe flush?

 

Setup 20x9.5 front n 20x10.5 rear.. Slammed on tein flex and stock alignment settings.. Getting slight rub when riding solo and even more when riding with passenger... How much negative camber should i have em align to get rid of the rub? Want the look to stay the same just have the top part of the wheel stick in lil more to get rid of rub.. Seems to only rub on the left rear.. Right now i believe last time i did it i was at -1.1... Should i bump to -2?

 

Fenders already rolled?

 

yea fenders already rolled..

 

If you have the specs from your last alignment, just add another 1/2 to 3/4 deg of camber to what you have. A good mechanic can figure it out.

 

at LEAST 15-mm... i'd go with 20-mm.

 

question for the stretch guys...

for MILD stretch (235/35/20 on 9.5 and 255/35/20 on 10.5),
which is better: kumho SPT or general exclaim?

 

Shane and Danny this is for you.

im jumping on that DPE group buy

i want 9.5 front 11 in the rear

mild to no stretch tires i like wide tires

i will have the akebona BBK so i will need them to clear

i dont want to have to run crazy negative camber

i need offsets and tires sizes please

Thanks guys

 

Oh forgot to say ill roll and pull fenders

 

Beebo what size tires are you wanting to run like a 255 / 285 ? also 19 or 20" wheel?

 

will 255 in the front work for a 9.0 rim? will 255 be stretched on a 9.5 in the front?

i plan on 20's

 

255 is NO stretch on a 9.5. From my experience if you want any kind of flushness with the fronts you have to run a mild stretch and a lil camber cause the way the fender/liner/fender lip is.

 

like 235/35/20 on 9.5 with -2 camber?

 

ok what would be a mild stretch for the front?

 

245 is a little stretchy on the front, but 235 is a stretchapotomus! (to me)

I have 265s on my 8.5"