Dat meat.

 

For those of you that have rolled/pulled the front fenders on a coupe, do you use a roller or a finisher? With the inner fender in there, im not quite sure of the process. would you just take out the bolts and clips and then roll it or is there more to it?

Thanks.

 

Quick question: I want to put 10mm spacers on the rear with some extended studs, problem is installing the extended studs in the rear hub. I am not able to get a longer stud than stock to fit between the e brake component and the hub. has anyone done this without removing the hub from the car? Jazzy has put 10mm spacers on his rears but claims he is using stock studs. I have heard from many people not to do this as it is unsafe due to the thread. I have been searching but can not find any info. thanks.

 

I saw a G37 the other day and he said he had 20 x11 RHONNA RC10 CONCAVES all the way around. We were both driving so I could not get his number and further question him about it. They looked sweet and were obviously outside the tire well. I asked him did they rub and he said no do to the Offset and Coils he had on theme. Ive called several places since then, including Asanti Wheels and Super Buy Tires and they said it would take hella modifications to make that happen..

Has anyone ever done it or no anyone who has. I would like to know what mods are needed to do it. I wish I could have got his number for further investigation, but Im hoping someone here can help.

Thanks.

BADDAZG

 

What?

 

Haha if you want some legitimate help you need to give us some more information man

Like what car do you actually have (G35 coupe or sedan, G37 sedan or coupe) because that will make a huge difference in trying to help you fit 20x11 wheels all around

 

it will fit

 

^^haha being super helpful as usual

hard to help somebody when they don't give you anything to go off of though

 

G35/7 fenders should have no problem fitting 11s

And I'm sure Rhonna (Rohana) should have offsets that fit his car easily.

 

Sorry guys. I am a newby here. So please show me a little slack. LOL.

I have a 2004 G35 Coupe. I would like to go 20x10.5 or 20x11 all the way around. Everything is stock on the car right now. Just learning about all the High and Low offsets. Im not sure of what the guy with the G37 had done to his so cant give any specs on that of course.

Anyway. Just want to know what my overall options are. Im looking at Asantis and I was told that I would need 275/30/20 for that size rim, but I would have to do a lot of mods to get them to work.

Thanks fellow G35ers.

 

go to the asanti website and tell me what offsets are available.

 

Has any one had Kranze LXZ , or similar wheels, with FR faces (super low disk) with bbk? I'm trying to figure out how big of a spacer id have to run to clear akebonos. About 15-20 spacer?

Thank!

 

depends on BBK.

but i'd go 20 if not 25

 

i ran 20mm for my akebono when I had my SSRs with mid disk.

Had like 1.5mm clearance.

 

Looks like your SSR buyer couldn't hang? I see them for sale already!