Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::
#7069
BUMP please help!!
Hey guys, this question has been been probably asked 1000 times, i searched the forums and photos and i came to the conclusion that for my car witch is a 2003 g35 sedan stock suspension and no fender roll i should be fine with this setup
TSW MIRABEAU 19x8.0 5/114.3 ET35 up front with 255/35/19 tires
TSW MIRABEAU 19x9.5 5/114.3 ET40 in the rear with 275/35/19 tires
i ordered them from a company and they told me yup all is good and it will fit but i got an email today saying that TSW says that those rims with those specs WILL NOT fit on my car and will rub all day.
can anyone confirm this for me? or help me out with a proper setup that will work, other options for me on these rims are
TSW MIRABEAU 19x8.0 5/114.3 ET35
TSW MIRABEAU 19x8.5 5/114.3 ET20
TSW MIRABEAU 19x9.0 5/114.3 ET30
TSW MIRABEAU 19x9.5 5/114.3 ET40
TSW MIRABEAU 19x8.0 5/114.3 ET35 up front with 255/35/19 tires
TSW MIRABEAU 19x9.5 5/114.3 ET40 in the rear with 275/35/19 tires
i ordered them from a company and they told me yup all is good and it will fit but i got an email today saying that TSW says that those rims with those specs WILL NOT fit on my car and will rub all day.
can anyone confirm this for me? or help me out with a proper setup that will work, other options for me on these rims are
TSW MIRABEAU 19x8.0 5/114.3 ET35
TSW MIRABEAU 19x8.5 5/114.3 ET20
TSW MIRABEAU 19x9.0 5/114.3 ET30
TSW MIRABEAU 19x9.5 5/114.3 ET40
#7071
#7073
#7074
#7075
Hey guys,
06 g35. running BC OEM style coil overs, have them at the hardest setting and I'm riding at about 25 1/4' from ground to fender. Fenders are rolled flush with a pull. Wheels are 19X12 +7 with 255/35-19 in the rear. I am kind of new at the stance game, so I need a little help with the spring rates. Also running some decent camber already, I'm guessing around -5 ish. but I can't find a shop that can get it on an alignment rack.
If i hit a bad pot hole (that I can't avoid or don't see) the tire is hitting the fender and pushing it inward causing the tire to rub. So I have to pull it out again later.
Is there a spring rate that anyone is running that they would suggest? I tried searching and didn't seem to find an answer or didn't understand the explanation.
Thanks in advance.
06 g35. running BC OEM style coil overs, have them at the hardest setting and I'm riding at about 25 1/4' from ground to fender. Fenders are rolled flush with a pull. Wheels are 19X12 +7 with 255/35-19 in the rear. I am kind of new at the stance game, so I need a little help with the spring rates. Also running some decent camber already, I'm guessing around -5 ish. but I can't find a shop that can get it on an alignment rack.
If i hit a bad pot hole (that I can't avoid or don't see) the tire is hitting the fender and pushing it inward causing the tire to rub. So I have to pull it out again later.
Is there a spring rate that anyone is running that they would suggest? I tried searching and didn't seem to find an answer or didn't understand the explanation.
Thanks in advance.
#7076
#7077
Registered User
iTrader: (10)
So picked up the gf06's 19x9.5 + 15 and 19x10.5 +15 , need help picking out tires which size should I run to not set off vdc . Was thinking 275/35 and 245/35 .would those sizes cause any issues ? Yes I'm drop on springs soon to be coils and I am planing on getting my fenders rolled
#7080