you wont have vdc issue I had the same setup for tires u got no problem for me. almost standered set up.

 

Nice so then il get 245/40 all around on my coupe

 

Thanx

 

+44

 

19x11 +25 front, 19x11 +12 rear - 2 inch drop on springs.

Any ideas on how this will go? any rubbing on the struts as im not on coilovers?

Any input is much appreciated. Hate included.

 

How horrible will these look?

18x7.5 square +30--03 g sedan

 

It depends on the stock offset, what is stock offsets for your sedan?

 

I have no idea, came with 17s non brembo brakes.

 

19x11 +25 front, 19x11 +12 rear - 2 inch drop on springs.

Any ideas on how this will go? any rubbing on the struts as im not on coilovers?

Any input is much appreciated. Hate included.

 

I have 19x9.5 +12 f and 19x10.5 +15 rear
Deff going 245/35 for the rears but should I go with 225 or 235 for the front? Going for that stretched look and I'm on coilovers and looking for good handling

 

That is saying your rears are more sunken then the fronts-!?! Your getting hate from me that will not look good at all. If you are running 11" up front at that offset I'm fairly sure you will be mexi-flush running 1 inch of tire overhang.

With your interesting turbo build, don't cheap out on wheels, stay stock for strength.

 

225 on 9.5 is over stretched. You need to go at least 235. Search online for appropriate size tire widths for rims.

 

The rears wont be terribly sunken compared to the fronts will they? As the offset will be pushing them out. +12 sits a fair bit further out than +25.

Stock wheels=meh. If i was to toss up the 2 i would rather my car look nice and scrap the turbo build tbh. However i have the chance to do both by saving costs both ways.

 

Looking at some used wheels on CL and wondering if they will fit...

They are 19x8.5(35)/ 19x9.5 (32 or 35)

Tires are 245/35/19front, 275/30/19 rear

Car is a 06 sedan rwd...dropped on tein stechs. Fenders are rolled in the rear.


Thanks in advance.

 

You'll be fine with those sizes and offsets.