Hey everybody been a while since i've posted on the forum but have a question regarding tire setup for an 04 coupe. I did a search in this thread and forum on running a 275/35/19 square setup but haven't found anything. So here goes...

I currently have the following setup on my 04 coupe and looking to move towards a square setup for Track DE's and Daily Driving. Has anyone run this type of square setup before? If so, do you happen to have any pics? Also, I've heard running square can cause the VDC to act up. Can anyone please enlighten me on this? Thanks in advance for your input!

Current Setup:
Lowered on Bilstein PSS10's Front height (25.5")
SSR SP1's
19x9.5(f) 245/35
19x10.5(r) 275/35

Future Setup:
19x9.5(f) 275/35
19x10.5(r) 275/35

 

Double Post....Mods please delete

 

http://www.kijiji.ca/v-tires-rims/ma...ationFlag=true

Didn't want to start a new thread for this

Pretty sure this guy is just hoping someone bites. Way too much IMO and those tires look about half tread to me. What do you guys think? $3000-3500 is probably enough

 

Are 18x9 all the way around possible

 

What is the best tires combination for sedan on 19" Rays? Lowered on 350Z revised suspension.

 

will this fitment work? will it rub and will I need to get my fenders rolled? also can i lower it without rolling the fenders? i want no cam adjust
SPECS:
19x8.5 +22 245/40/19
19x9.5 +22 275/35/19

if you have pics please post

 

20x9 +25 front
20x10.5 +30 rear
The tires the shop plans on putting on is 245/30zr20 for the front and 275/30zr20 for the rears.
I'm lowered on bc coilovers. Will there be any rubbing issues? I'm not completely slammed. Just lowered a few inches

 

That's the perfect offset and tire size if you have a coupe, nough said...Gary

 

I have stock 03 G35 Sedan. I want to put 19inch rims on it i saw one with 18 and the tries just looked to fat. What would the correct offset be ? Just wanted to make sure. Thanks

And i did use the search button.

 

Ha try again. What size wheels width do you want also.

 

My friend has a twin turbo g and wants to know how wide of wheels and tires he can fit without rolling the fenders. The wheels hes looking at are 20 by 11 inches wide and a +28 offset. He currently is stock height but eventually will be lowered. Hes looking at 305s or 295s. Anyone have any experience with this? Thank you

 

I guess we must assume (love that word) he has a coupe and not a sedan due to lack of information. Running 20X11" wheels along with 305 rubber would look cool but I believe he'll need to roll/pull those fenders with mid 20s offsets! Option would be to do the trendy camber /-0-\ settings but his tires wouldn't last a year. There's nothing wrong with rolling the fenders, done right it won't hurt the car or resale value...Gary

 

Thank you
thanks for the help hes probably gonna end up rolling his fenders or going with something a little smaller, and yeah it is a coupe sorry for not specifying. We were just wondering the biggest size people have put on their car. Im currently running 10 in wide wheels with 275, but we figure the wider the better to put the power down.

 

Hey guys I'm still a little uneducated when trying to fit wheels. I was wondering if this set of wheels will properly fit on my g coupe. Basically the + 25 offset is my concern. I know our stock wheels are +20 I believe but with + 25 will the wheel be sunk in too much?

http://www.vexmotorsports.com/Rota-W...ls_p_8043.html

Thanks guys

 

Spend a lil more and go for the work kiwami, look the same and have better offsets..