I've got the APR kit on my G35. I've talked to a few different people with the same kit and they all have different offsets with the same size tires. Martyg35 gave me some good info about the different manufactures having different starting points to measure from.
One person told me that the company that I order the wheels from should get all the info from APR and then figure it all out for me. Well I've called two dealers and neither would touch the topic with a ten foot pole. I understand that there is a liability there on their part but if I screw up then I'm out a few thousand.
Im really trying to get this right and would appreciate an education that will land me the confidence on dropping the cash
One person told me that the company that I order the wheels from should get all the info from APR and then figure it all out for me. Well I've called two dealers and neither would touch the topic with a ten foot pole. I understand that there is a liability there on their part but if I screw up then I'm out a few thousand.
Im really trying to get this right and would appreciate an education that will land me the confidence on dropping the cash
Frankieg35
Registered User
close
- Join DateOct 2006
- LocationSouth Jersey
- Posts:17,256
-
iTrader Positive Feedback98
-
iTrader Feedback Score(41)
-
Likes:2,905
-
Liked:857 Times in 745 Posts
i would say to do 21x11 and 21x12 and negative offsets..exactly i dunno but i can picture it and it would look insane..i might do this setup next year..
Registered User
O HELLA OEM
Registered User
close
- Join DateAug 2007
- LocationMonroeville,PA
- Posts:22,421
-
iTrader Positive Feedback100
-
iTrader Feedback Score(129)
-
Likes:103
-
Liked:67 Times in 41 Posts
lets see some pics of your APR Widebody G
this is Dal's APR Wiiidebody G


this is Dal's APR Wiiidebody G


GreenGoblin
The goblin resurrection
close
- Join DateOct 2006
- LocationIn my garage
- Posts:25,863
-
iTrader Positive Feedback100
-
iTrader Feedback Score(66)
-
Likes:173
-
Liked:187 Times in 95 Posts
Why not just measure.
Registered User
I though I remembered seeing a device that would mount onto the car (with the rim off the car) and would allow you to measure the wheel well of your car to approximate to maximum size of rim/tires you could use. I don't remember where I saw it, but if I run across it I'll post it up.
Former G35driver Vendor
ShanesG
Former G35driver Vendor
close
- Join DateSep 2007
- LocationPasadena
- Posts:23,550
-
iTrader Positive Feedback100
-
iTrader Feedback Score(84)
-
Likes:106
-
Liked:335 Times in 187 Posts
how much wider does the apr widebody make the fenders???
i wanna do wide body, just to fit an 8"+ lip in there
i wanna do wide body, just to fit an 8"+ lip in there

APR
This Aerodynamic Kit Includes:
* Widebody Front Bumper
* Carbon Fiber Wind Splitter/Undertray
* Widebody Front Fenders (45mm)
* Widebody Side Skirt
* Widebody Rear Fenders and Gas Door (50mm)
* Widebody Drag Reduction Rear Bumper
This Aerodynamic Kit Includes:
* Widebody Front Bumper
* Carbon Fiber Wind Splitter/Undertray
* Widebody Front Fenders (45mm)
* Widebody Side Skirt
* Widebody Rear Fenders and Gas Door (50mm)
* Widebody Drag Reduction Rear Bumper
I'm going to try to measure but I've never done it before and like I said, I really don't want to get it wrong
Frankieg35
Registered User
close
- Join DateOct 2006
- LocationSouth Jersey
- Posts:17,256
-
iTrader Positive Feedback98
-
iTrader Feedback Score(41)
-
Likes:2,905
-
Liked:857 Times in 745 Posts
The APR GTR35 Widebody Aerodynamic Kit for the Infiniti G35 Coupe has redefined tuning for the executive level sports touring coupe. Offering an increase of +45mm on the front and +50mm on the rear of each side of the car, the APR GTR35 Widebody Aerodynamic Kit provides the G35 Coupe a whole new level of high speed traction. This increase in size accommodates front wheel sizes of 20�x10� with 285/25/20 profile tires and rear wheel sizes of 20�x12� with 325/25/20 profile tires.
http://emob951.photobucket.com/album...5/IMG_0051.jpg
Would someone let me know if you can see my pics from this.
Would someone let me know if you can see my pics from this.
Frankieg35
Registered User
close
- Join DateOct 2006
- LocationSouth Jersey
- Posts:17,256
-
iTrader Positive Feedback98
-
iTrader Feedback Score(41)
-
Likes:2,905
-
Liked:857 Times in 745 Posts
Omg imagine a 6 inch front lip an 8 inch rear lip..slammed and tucked!! Omg that would be insane!!




