20" Work Varianza T1S

Front:
20"x9.5" with +15mm offset
245/35/20
R-disk

Rear:
20"x11" with +25mm offset
275/30/20
O-disk

My G35 is lowered on 350z Tein S-Techs and I have the OEM Brembo brakes. My camber kit has the rear camber set at about -1.6 degrees.

My questions are:
1) Will these wheels clear my BBK?
2) Will I need to roll my rear fenders?

Thanks in advance!

 

1. yes they are the correct disk to clear brembos
2. you should be fine with the +25 with out rolling

 

Thanks

Also, would you happen to know if the Varianza's require hub centric rings to fit perfectly on the G?

 

You should be fine.

Now, if you lowered more with less than 2 degrees negative camber, then maybe.

 

^
Thanks!

I'm putting them on tomorrow (for like a month before the rain arrives here in Vancouver), hopefully I have no issues.

 

your brakes will be cleared. Unfortunately you'd have to roll your fenders.

 

You should be gravy I'd roll the fenders just in case but I think you'll be ok.

 

I don't get any rubbing when driving around with 3 people. I haven't tried driving around with a full car load yet. Hopefully there isn't any rubbing. I'm taking off the wheels soon (so much rain in Vancouver nowadays) and prepping for the winter.

I'll decide if I need to roll my fenders next summer...as of now, I'm just happy =)