Awesome idea Shane!

Car: 2005 G35 Sedan with Wilwood Front 6p/4p BBK (14"/13" rotors)
Suspension: BC Racing Coilovers, SPC rear camber kit
Wheels: Nismo LMGT4s 19 x 8.5 +0 / 19 x 9.5 +10
Tires: F: 225/35, R: 235/35 Yokohama S-drives
Alignment ~-4.0 camber F/R
Fenders Work: Fronts pinched flat and flared a bit, Rears pulled 5mm (by Shane!)
Spacers: Yes, 25mm F / 20mm R
Lugs: Project Kics Neo Chrome R40

 

19X8.5 +35 with 25mm spacers (so basically 8.5+10)

245/40/19

Fenders rolled & flared about 25mm front and back

Eibach Sportline - front -2.5 (or so) rear -2 (or so)

BTW, 25mm was too much, rubbed a little on incline and hard cornering - so switched to 20mm spacer - but these pics are with 25. Will post other pics later with different wheels with more aggressive offset and no spacer. Also, I'm on Tanabe coilovers now (Sportlines in pics)

 

Bump for more pics and specs for people to reference too!!

 

Bump...added new pics/info in my post.

 

2004 Brembo Coupe
Fender work/modification -- None
Spacers -- None yet
Wheel Size --18x9/10 +20 Rays G-Games
Tire Size -- Falken 245/40 and 265/35
Suspension setup -- Tanabe DF210 springs
Camber settings -- F:-2.2 R:-2.9

In the works are some 15mm spacers with extended lugs all around and whatever amount of rolling i will need to accommodate.

 

Coupe
No fenders rolled. yet
38mm ichiba v2 spacers all around
Wheels -G37 Sport OEMs, Front 19x8.5 +43, Rear 19x9 +45
Tires- Bridgestone Potenza RE050Front 245/40, Rear 275/45
Suspension setup- Front 350z Tein S-Techs, Rear G35 coupe Eibach Pros (06-07 Z shocks)

 

in case some of you didn't see my thread

2004 Coupe 6MT (Brembos)

fronts rolled flat and rears flat w/ slight pull (all by OP )

3-mm spacers up front to clear Brembos

Work VS-XX
F: 20X9.5 +4 R-disk w/ 235/35 General Exclaims
R: 20X10.5 +6 A-disk w/ 255/35 General Exclaims

350Z Tanabe GF210 w/ springmount mod

sorry, no camber settings

 

I like this thread, this is how all wheel picture threads should be like.

 

Been meaning to post n this thread.


Fender work/modification - yes. Rolled wit a slight pull.*
Wheel Size - 19x9 +9 19x10 +20*
Tire Size. 225/35/19 245/35/19 Toyota t1rs
Suspension setup: function and form 2. Spc rear camber arm with toe bolt
Camber settings(If you have them) -2.5 all around

 

bump

 

Coupe or sedan- Coupe
Fender work/modification- Rears Rolled
Spacers-yes/no- NO
Wheel Size - Diameter/Width/Offset/AND DISC
19" Volk TE37 Timeattacks
19x9.5 +22 front and 19x10.5+22 Rear
Tire Size.- 255/35/19 front and 285/35/19 rear
Suspension setup- Function and Form Coilovers
Camber settings(If you have them)- No Camber set yet.

 

Not done yet, but I wanted to revive this thread! Such a good idea for fitment!

Coupe
Fender work - Rolled
Spacers- No
Wheel Size - 19"/8.5Fr - 10Rr/Offset: +17Fr +22Rr
245/35/19 - 275/35/19.
Suspension setup: Stock

 

OK I'll play as well. Please don't hate on my stockish look, I love the car as it sits now. Of course I'm sure that will change down the road.

Coupe or sedan- Sedan
Fender work/modification- Rolled in rear
Spacers-yes/no- No. Might look at 5-10 mm spacers, not sure yet
Wheel Size - Diameter/Width/Offset/AND DISC
Stock Rays, need I say more
Tire Size.- 245/40/19 all around
Suspension setup- Sedan S Techs/06 350Z shocks,struts
SPL V2 Front A Arms/Ichiba rear camber arms
Camber settings(If you have them)- -1.3 Front -1.6 Rear

 

bump for more pics

 

G35 coupe
Fender work/modification - Front and rears rolled flat with no pulling
Spacers - Project Kics 10mm front and 5mm rear
Wheels - VarrStoen
Wheel Size - F: 19x9.5 -10 w/spacer 235/35/19
R: 19x10.5 -5 w/spacer 255/35/19
Suspension - Stance Gr+ with OEM rear setup
Camber settings(If you have them)- F: -2.7 degrees R: -2.7 degrees