Official Wheel Fitment Pic thread{PICS&SPECS ONLY}
#31
06-18-2010, 12:36 AM
Guest
Posts: n/a
G35 coupe
Fender work/modification - Front and rears rolled flat with no pulling
Spacers - Project Kics 10mm front and 5mm rear
Wheels - VarrStoen
Wheel Size - F: 19x9.5 -10 w/spacer 235/35/19
R: 19x10.5 -5 w/spacer 255/35/19
Suspension - Stance Gr+ with OEM rear setup
Camber settings(If you have them)- F: -2.7 degrees R: -2.7 degrees
Fender work/modification - Front and rears rolled flat with no pulling
Spacers - Project Kics 10mm front and 5mm rear
Wheels - VarrStoen
Wheel Size - F: 19x9.5 -10 w/spacer 235/35/19
R: 19x10.5 -5 w/spacer 255/35/19
Suspension - Stance Gr+ with OEM rear setup
Camber settings(If you have them)- F: -2.7 degrees R: -2.7 degrees
#32
07-10-2010, 10:04 PM
#35
07-11-2010, 11:16 AM
I'm ready to be flamed. 
Coupe or sedan: coupe
Fender work/modification: fronts are stock rears cut
Spacers: yes/no: yes, H&R 25mm front 35mm rear
Wheels: size: Stock coupe 18's - 18 x 8
Offests: -5 rear and +5 front
Suspension setup: 350z H&R springs with rear spring mount mod
Camber settings(If you have them): none
A FEW GOOD PICS SHOWING THE FITMENT:
First picture to show off the cut fenders:
**BEFORE**
you can see what fender rolling can do i was a little sketchy on even attempting to touch this
**AFTER**
yes its not as straight a
Temporary pics of the fitment:
I will update after a photoshoot.
Coupe or sedan: coupe
Fender work/modification: fronts are stock rears cut
Spacers: yes/no: yes, H&R 25mm front 35mm rear
Wheels: size: Stock coupe 18's - 18 x 8
Offests: -5 rear and +5 front
Suspension setup: 350z H&R springs with rear spring mount mod
Camber settings(If you have them): none
A FEW GOOD PICS SHOWING THE FITMENT:
First picture to show off the cut fenders:
**BEFORE**
you can see what fender rolling can do i was a little sketchy on even attempting to touch this
**AFTER**
yes its not as straight a
Temporary pics of the fitment:
I will update after a photoshoot.
great posts so far thanks!
#38
08-02-2010, 08:15 PM
I'm ready to be flamed.
Coupe or sedan: coupe
Fender work/modification: fronts are stock rears cut
Spacers: yes/no: yes, H&R 25mm front 35mm rear
Wheels: size: Stock coupe 18's - 18 x 8
Offests: -5 rear and +5 front
Suspension setup: 350z H&R springs with rear spring mount mod
Camber settings(If you have them): none
A FEW GOOD PICS SHOWING THE FITMENT:
First picture to show off the cut fenders:
**BEFORE**
you can see what fender rolling can do i was a little sketchy on even attempting to touch this
**AFTER**
yes its not as straight a
Temporary pics of the fitment:
I will update after a photoshoot.
Coupe or sedan: coupe
Fender work/modification: fronts are stock rears cut
Spacers: yes/no: yes, H&R 25mm front 35mm rear
Wheels: size: Stock coupe 18's - 18 x 8
Offests: -5 rear and +5 front
Suspension setup: 350z H&R springs with rear spring mount mod
Camber settings(If you have them): none
A FEW GOOD PICS SHOWING THE FITMENT:
First picture to show off the cut fenders:
**BEFORE**
you can see what fender rolling can do i was a little sketchy on even attempting to touch this
**AFTER**
yes its not as straight a
Temporary pics of the fitment:
I will update after a photoshoot.
#41
09-10-2010, 12:26 PM
#43
09-10-2010, 03:40 PM
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,301
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods
Car: 05 LS sedan, Tanabe Pro 5 coils, Ichiba camber rear, SPL V2 up front
Wheels: 5Zigen Gravis 1, 19X8.5 +38 F, 19X9.5 +38 R
Tires: 245/40/19 F, 255/40/19 R
Alignment: Haven't re-aligned after coils, need another week
Fenders Rolled: Yes in the rear only
Spacers: Not at the moment, will be going with a +15 in the front with 225/40 tires when the current tires wear out.
Lugs: 5Zigen Forged
Notes: Can't go lower in the rear with the 255s ATM and coils only have 1/4" drop left up front and 1/2" left in the rear. Not a good choice for those who want to slam their stuff, but have a phenomenal ride. Important to me as I drive 2000 miles a month for work.
Wheels: 5Zigen Gravis 1, 19X8.5 +38 F, 19X9.5 +38 R
Tires: 245/40/19 F, 255/40/19 R
Alignment: Haven't re-aligned after coils, need another week
Fenders Rolled: Yes in the rear only
Spacers: Not at the moment, will be going with a +15 in the front with 225/40 tires when the current tires wear out.
Lugs: 5Zigen Forged
Notes: Can't go lower in the rear with the 255s ATM and coils only have 1/4" drop left up front and 1/2" left in the rear. Not a good choice for those who want to slam their stuff, but have a phenomenal ride. Important to me as I drive 2000 miles a month for work.
#44
09-10-2010, 05:08 PM
'04 G35x Sedan
Fender work/modification: Front: No. Rears: Rolled flat
Spacers: 10mm Ichiba V1s rear
Wheel Size - Rays Nismo LMGT4. 19x8.5 +25 front and 19x8.5 +15 rear (w/ spacers)
Tire Size: 225/40/19 Front and 255/35/19 rear
Suspension setup: Tein Sedan S-Techs. Ichiba Camber kit rear.
Camber settings: Front -2.0; Rear - 3.3
Running more camber out back due to rubbing. Compression rates not as stiff as w/ coils which will be next. Once tires wear out, will go 245/35/19 all around. 5mm spacers to go up front soon as well.
Fender work/modification: Front: No. Rears: Rolled flat
Spacers: 10mm Ichiba V1s rear
Wheel Size - Rays Nismo LMGT4. 19x8.5 +25 front and 19x8.5 +15 rear (w/ spacers)
Tire Size: 225/40/19 Front and 255/35/19 rear
Suspension setup: Tein Sedan S-Techs. Ichiba Camber kit rear.
Camber settings: Front -2.0; Rear - 3.3
Running more camber out back due to rubbing. Compression rates not as stiff as w/ coils which will be next. Once tires wear out, will go 245/35/19 all around. 5mm spacers to go up front soon as well.
The following users liked this post:
Vvilla320 (07-30-2021)
#45
09-10-2010, 05:45 PM
Awesome idea Shane!
Car: 2005 G35 Sedan with Wilwood Front 6p/4p BBK (14"/13" rotors)
Suspension: BC Racing Coilovers, SPC rear camber kit
Wheels: Nismo LMGT4s 19 x 8.5 +0 / 19 x 9.5 +10
Tires: F: 225/35, R: 235/35 Yokohama S-drives
Alignment ~-4.0 camber F/R
Fenders Work: Fronts pinched flat and flared a bit, Rears pulled 5mm (by Shane!)
Spacers: Yes, 25mm F / 20mm R
Lugs: Project Kics Neo Chrome R40
Car: 2005 G35 Sedan with Wilwood Front 6p/4p BBK (14"/13" rotors)
Suspension: BC Racing Coilovers, SPC rear camber kit
Wheels: Nismo LMGT4s 19 x 8.5 +0 / 19 x 9.5 +10
Tires: F: 225/35, R: 235/35 Yokohama S-drives
Alignment ~-4.0 camber F/R
Fenders Work: Fronts pinched flat and flared a bit, Rears pulled 5mm (by Shane!)
Spacers: Yes, 25mm F / 20mm R
Lugs: Project Kics Neo Chrome R40