deez: i have yet to get an alignment, my toe must be way off.

monard: yea might just end up doing that, another 5mm in the front and i think it'd sit nice, and yes, i dremeled both sides, since the passenger side ended up getting ripped as well,

 

raising it a tad will make the wheel poke a bit and will give you extra clearance
when you get it add the spacer

 

06 sedan dropped on tein flex/edfc 19x8.5 +40 /19x9.5 +45 axis penta with 245/35 all around, still need to do some spacers (rears were just rolled today)

 

Throw some spacers on there and you'll be money.

 

Cleanest Silver G I've seen in a long time

 

Coupe
Fender: rolled
Spacers: No
Wheel Size: Work Varianza T1S FS 20x9.0 +13, 21X10.5 +17
Tire Size: 255/30/30 & 295/25/21
Suspension setup: Stock Sports Suspension on 350Z H, love my ride quality and functionality
Camber settings: Stock, SPC F and R Camber kit and bushings for control arms







$27K car accident on November 1st, car still missing engine and paint still not right....

25mil spacers on the front is the only addition. Stock 370z rims 9.0F and 10.0R (not sure of offsets)....


ohhhh to be humbled back to your roots!

 

updated....

 

trying to get my spacers ordered, but still not 100% on the correct sizing to get...anybody with any input on that? pics on top of page dg sedan...thanks

 

^post is gonna get deleted for asking in the wrong thread. but in order to know, we need your wheel specs

 

those Work T1s...datttazzzzz

 

06 coupe.
oem 350z springs
[discontinued[ RoJa r2-7
F: 19x9 245/40/19 +20
R: 19x10 275/35/19 +12

 

Just had to say, I <3 this thread. Its really helped me out a ton these past few weeks while i was deciding on wheel/tire specs. Im going with some fresh out of the mold (new widths and offsets) linea corsa 818s. I should be the first person running them, as they will be going into production soon. Ill post pics and specs as soon as they are mounted. (in 2-3 months)

 

Question for you staggered guys. I washed my car today and realized that rock chips were all over my doors and also rear bumper (sides)! What can I do?? I have veilside lip kit all around so I don't know if mudflaps would even work. Please help!

 

Who's got new wheels? Post em up!

 

Here's a side-note bump...Tenzo type M's don't have the clearance at the hub to fit spacers...sigh...no 10mm fun for me...