I got an 06 red sedan with rolled fenders. Just got some 360 forged 19x9 30 and 19x9.5 30 I'm lowered on a z/g drop. What's my best bet on tire sizes?

 

Wrong thread. I'd direct you to the right one but I am on my phone .

 

great thread!!! thanks a lot!!

 

Yes! This is an awesome thread! More Please! Anyone Rocking 19x9.5 19x11

Hey Supreme what tires are you running on those?

 

for the varianza t1s with the 20x10.5 offset 0 in the rears. do you have any rubbing issues and how is the ride quality since you are lower a tad on the tein basics... need info asap... thanks.. have a similar setup on the way and would like some input...

 

you won't have rubbing issues as long as your camber is set correctly.

as long as you have a 245/35 in the rear, and running -1.8*ish, you're golden.

 

vertini hennessey 20x10 +25 all round dropped on Tein S-Techs, am i going to be flush with guards with/without spacers? rubbing is ok as i can get a mate to fix that with a guard roller thanks

 

Ask questions in the "Questions about Wheels/Tires" thread. This thread is for pics and specs of wheels only.

If you have a coupe, no, they won't be flush. You'd need 15mm spacers minimum.

 

Some nice setups here

 

ahem...



bump

 

People running 19x10.5 et22 rear. Is it 100 % mandatory to roll rear fenders with a 275/35/19 tire..Dropped 1 inch..and 3 degrees of camber in rear..

 

Any pics with someone dropped on Eibach pro-kits with 19x10.5 et 22 rear...?

 

That's quite the specific request!

 

Or a 1-1.5 inch drop on those rear specs...

 

now that i got some new wheels on my g i can give a lil to this thread..
im sitting on 350z stechs (for now) just got these wheels on 2 days ago and havent got a chance to roll the fenders yet..luckily i have other cars i can drive so i dont mess up my tires or fenders.. but the front are 245/35/20 8.5" wide and the rears are 285/30/20 10" wide and 25 offset all 4 corners