Official Wheel Fitment Pic thread{PICS&SPECS ONLY}
#16
Awesome idea Shane!
Car: 2005 G35 Sedan with Wilwood Front 6p/4p BBK (14"/13" rotors)
Suspension: BC Racing Coilovers, SPC rear camber kit
Wheels: Nismo LMGT4s 19 x 8.5 +0 / 19 x 9.5 +10
Tires: F: 225/35, R: 235/35 Yokohama S-drives
Alignment ~-4.0 camber F/R
Fenders Work: Fronts pinched flat and flared a bit, Rears pulled 5mm (by Shane!)
Spacers: Yes, 25mm F / 20mm R
Lugs: Project Kics Neo Chrome R40
Car: 2005 G35 Sedan with Wilwood Front 6p/4p BBK (14"/13" rotors)
Suspension: BC Racing Coilovers, SPC rear camber kit
Wheels: Nismo LMGT4s 19 x 8.5 +0 / 19 x 9.5 +10
Tires: F: 225/35, R: 235/35 Yokohama S-drives
Alignment ~-4.0 camber F/R
Fenders Work: Fronts pinched flat and flared a bit, Rears pulled 5mm (by Shane!)
Spacers: Yes, 25mm F / 20mm R
Lugs: Project Kics Neo Chrome R40
Last edited by CandlestickPark; 07-10-2010 at 10:03 PM.
The following users liked this post:
Vvilla320 (07-30-2021)
#17
19X8.5 +35 with 25mm spacers (so basically 8.5+10)
245/40/19
Fenders rolled & flared about 25mm front and back
Eibach Sportline - front -2.5 (or so) rear -2 (or so)
BTW, 25mm was too much, rubbed a little on incline and hard cornering - so switched to 20mm spacer - but these pics are with 25. Will post other pics later with different wheels with more aggressive offset and no spacer. Also, I'm on Tanabe coilovers now (Sportlines in pics)
245/40/19
Fenders rolled & flared about 25mm front and back
Eibach Sportline - front -2.5 (or so) rear -2 (or so)
BTW, 25mm was too much, rubbed a little on incline and hard cornering - so switched to 20mm spacer - but these pics are with 25. Will post other pics later with different wheels with more aggressive offset and no spacer. Also, I'm on Tanabe coilovers now (Sportlines in pics)
Last edited by OCG35; 02-06-2010 at 08:49 PM.
The following users liked this post:
Vvilla320 (07-30-2021)
#20
2004 Brembo Coupe
Fender work/modification -- None
Spacers -- None yet
Wheel Size --18x9/10 +20 Rays G-Games
Tire Size -- Falken 245/40 and 265/35
Suspension setup -- Tanabe DF210 springs
Camber settings -- F:-2.2 R:-2.9
In the works are some 15mm spacers with extended lugs all around and whatever amount of rolling i will need to accommodate.
Fender work/modification -- None
Spacers -- None yet
Wheel Size --18x9/10 +20 Rays G-Games
Tire Size -- Falken 245/40 and 265/35
Suspension setup -- Tanabe DF210 springs
Camber settings -- F:-2.2 R:-2.9
In the works are some 15mm spacers with extended lugs all around and whatever amount of rolling i will need to accommodate.
The following users liked this post:
westsai (07-12-2016)
#21
#22
in case some of you didn't see my thread
2004 Coupe 6MT (Brembos)
fronts rolled flat and rears flat w/ slight pull (all by OP )
3-mm spacers up front to clear Brembos
Work VS-XX
F: 20X9.5 +4 R-disk w/ 235/35 General Exclaims
R: 20X10.5 +6 A-disk w/ 255/35 General Exclaims
350Z Tanabe GF210 w/ springmount mod
sorry, no camber settings
2004 Coupe 6MT (Brembos)
fronts rolled flat and rears flat w/ slight pull (all by OP )
3-mm spacers up front to clear Brembos
Work VS-XX
F: 20X9.5 +4 R-disk w/ 235/35 General Exclaims
R: 20X10.5 +6 A-disk w/ 255/35 General Exclaims
350Z Tanabe GF210 w/ springmount mod
sorry, no camber settings
#24
Been meaning to post n this thread.
Fender work/modification - yes. Rolled wit a slight pull.*
Wheel Size - 19x9 +9 19x10 +20*
Tire Size. 225/35/19 245/35/19 Toyota t1rs
Suspension setup: function and form 2. Spc rear camber arm with toe bolt
Camber settings(If you have them) -2.5 all around
Fender work/modification - yes. Rolled wit a slight pull.*
Wheel Size - 19x9 +9 19x10 +20*
Tire Size. 225/35/19 245/35/19 Toyota t1rs
Suspension setup: function and form 2. Spc rear camber arm with toe bolt
Camber settings(If you have them) -2.5 all around
Last edited by Johnnyone; 04-24-2010 at 11:21 AM.
#26
Coupe or sedan- Coupe
Fender work/modification- Rears Rolled
Spacers-yes/no- NO
Wheel Size - Diameter/Width/Offset/AND DISC
19" Volk TE37 Timeattacks
19x9.5 +22 front and 19x10.5+22 Rear
Tire Size.- 255/35/19 front and 285/35/19 rear
Suspension setup- Function and Form Coilovers
Camber settings(If you have them)- No Camber set yet.
Fender work/modification- Rears Rolled
Spacers-yes/no- NO
Wheel Size - Diameter/Width/Offset/AND DISC
19" Volk TE37 Timeattacks
19x9.5 +22 front and 19x10.5+22 Rear
Tire Size.- 255/35/19 front and 285/35/19 rear
Suspension setup- Function and Form Coilovers
Camber settings(If you have them)- No Camber set yet.
#27
#28
I drove ttrank's car solo
iTrader: (50)
Joined: Mar 2009
Posts: 18,299
Likes: 1,487
From: By the sea, Tx
G35 sedan w/ too much money in mods
OK I'll play as well. Please don't hate on my stockish look, I love the car as it sits now. Of course I'm sure that will change down the road.
Coupe or sedan- Sedan
Fender work/modification- Rolled in rear
Spacers-yes/no- No. Might look at 5-10 mm spacers, not sure yet
Wheel Size - Diameter/Width/Offset/AND DISC
Stock Rays, need I say more
Tire Size.- 245/40/19 all around
Suspension setup- Sedan S Techs/06 350Z shocks,struts
SPL V2 Front A Arms/Ichiba rear camber arms
Camber settings(If you have them)- -1.3 Front -1.6 Rear
Coupe or sedan- Sedan
Fender work/modification- Rolled in rear
Spacers-yes/no- No. Might look at 5-10 mm spacers, not sure yet
Wheel Size - Diameter/Width/Offset/AND DISC
Stock Rays, need I say more
Tire Size.- 245/40/19 all around
Suspension setup- Sedan S Techs/06 350Z shocks,struts
SPL V2 Front A Arms/Ichiba rear camber arms
Camber settings(If you have them)- -1.3 Front -1.6 Rear
The following users liked this post:
Vvilla320 (07-30-2021)
#30
G35 coupe
Fender work/modification - Front and rears rolled flat with no pulling
Spacers - Project Kics 10mm front and 5mm rear
Wheels - VarrStoen
Wheel Size - F: 19x9.5 -10 w/spacer 235/35/19
R: 19x10.5 -5 w/spacer 255/35/19
Suspension - Stance Gr+ with OEM rear setup
Camber settings(If you have them)- F: -2.7 degrees R: -2.7 degrees
Fender work/modification - Front and rears rolled flat with no pulling
Spacers - Project Kics 10mm front and 5mm rear
Wheels - VarrStoen
Wheel Size - F: 19x9.5 -10 w/spacer 235/35/19
R: 19x10.5 -5 w/spacer 255/35/19
Suspension - Stance Gr+ with OEM rear setup
Camber settings(If you have them)- F: -2.7 degrees R: -2.7 degrees