^are they v1 style spacers?

 

More pics and specs please!
Anyone have stock 17's with spacers on - lowered on Z/G setup? Do spacers really cause premature wheel bearing wear?

 

New setup and BUMP c'mon people! this is a great thread if you add to it!!! hehe

Coupe
Fender work/modification : Mild roll, rear fenders
Spacers- no
Wheel Size - 19x9.5 +19
19x10.5 +17
Tire Size: 245/35/19Fr 275/35/19Rr
Suspension setup: 350z H-techs w/SPL rear camber arms and toe bolts all around.
Camber settings: Front 2.1 / Rear 1.4

 

bump ahem....bump

 

Bump! I anything new guys

 

xxr 521
20x8.5 +32 20mm spacer
20x10.5 +30 5mm spacer (10mm being shipped)

General Exclaim UHP
245/35
295/30

BC Coilovers
Rear Ichiba Camber Kit, awaiting toe bolts.

 

Looks good! keep them coming

 

Update on my specs.

Running stock camber and toe settings dropped 3"

19X8.5 +23 225/40 F
19X9.5 +33 245/40 R

Flattened fenders and no rubbing, less than 2mm clearance F/R, SPL and Stillen camber kits FTW

 

Searched in here for a 20x9 +15 20x11 +15 setup but didn't see any.
Deciding what size tires to run in the front and rear.
Not looking for a streched look.
Anyone got ideas or pics?
Thank's for the help.

 

245/285

 

285 on a +15 might rub on the sides. You need the rear fender rolled all the way down

 

My fenders are rolled on the rear.
So if I go 245/35/20 & 285/35/20 i should be fine?

 

even if its rolled the lower part will catch the tire
just get 275/35

 

heres my car before with 285/30 BFG. Its runs large so the tire scraped the lower part of unrolled fender. I rolled it more and no more rub

 

Thank's for all the help!