just traded gt7 faceplates and fronts wont clear. some questions
#1
just traded gt7 faceplates and fronts wont clear. some questions
so i drove 200 miles to meet up iseechris today to do the volk gt-7 face swap
the rear 2 were done first and was perfect
we get to the first front wheel and when the wheel was put on, it didnt clear my brembos (Chris didn't have brembos) [Also, I believe the offsets are +27]
we hangout at the parking lot in the middle of no where tryna figure out what to do and end up driving back to SF and thanks to YT35, I was able to put 2 spares on the front
We tried putting 2 5mm spacers together (10mm) to test fit to see if 10mm spacers would work out and seemed like 15mm would clear the brembos.
i am on Espiler springs (not sure if it was for g35 or 350z, im sure it was for the Z) with a auth. kenstyle kit so the front is pretty low.
i have no camber kit
my front tire specs are 245/35/19
NOW the question:
If I get 15mm spacers for the front and roll/pull my front fenders, should i be okay?
Wyman @ mach III told me i shouldnt do it unless i get coilovers but i cant afford it now and now im stuck with 2 spares on the front (scary as hell driving around lol)
any opinions???
Oh and by the way, happy birthday chris
the rear 2 were done first and was perfect
we get to the first front wheel and when the wheel was put on, it didnt clear my brembos (Chris didn't have brembos) [Also, I believe the offsets are +27]
we hangout at the parking lot in the middle of no where tryna figure out what to do and end up driving back to SF and thanks to YT35, I was able to put 2 spares on the front
We tried putting 2 5mm spacers together (10mm) to test fit to see if 10mm spacers would work out and seemed like 15mm would clear the brembos.
i am on Espiler springs (not sure if it was for g35 or 350z, im sure it was for the Z) with a auth. kenstyle kit so the front is pretty low.
i have no camber kit
my front tire specs are 245/35/19
NOW the question:
If I get 15mm spacers for the front and roll/pull my front fenders, should i be okay?
Wyman @ mach III told me i shouldnt do it unless i get coilovers but i cant afford it now and now im stuck with 2 spares on the front (scary as hell driving around lol)
any opinions???
Oh and by the way, happy birthday chris
Last edited by willcho415; 03-26-2010 at 04:30 AM.
#2
you need a drop if your gonna put spacers on.
does the wheels really stick out too much?
if you cant afford coils and you really need a drop just cut your springs for the meantime then get coils when you have money. Sounds ghetto but you gotta do what you gotta do! lol cut front and back so the front wont drop too much
for BBK you need to know what disk type
does the wheels really stick out too much?
if you cant afford coils and you really need a drop just cut your springs for the meantime then get coils when you have money. Sounds ghetto but you gotta do what you gotta do! lol cut front and back so the front wont drop too much
for BBK you need to know what disk type
Last edited by Dranom; 03-26-2010 at 04:42 AM.
#3
#4
@Dranom : I don't think it will sticking out too much.
@HenryLee: I'm not sure, the volks came with the car and the sticker that has offset/width is torn off on the front wheels. BUT, i have 15mm spacers on the rear right now with offsets +24. Anyhow, so I should be good for the front if I add the 15mm+fender roll+Pull correct?
@HenryLee: I'm not sure, the volks came with the car and the sticker that has offset/width is torn off on the front wheels. BUT, i have 15mm spacers on the rear right now with offsets +24. Anyhow, so I should be good for the front if I add the 15mm+fender roll+Pull correct?
#6
#7
Trending Topics
#8
#9
#10