20mm/25mm or 25mm/30mm spacers with OEM 19's
#1
Join Date: Jul 2006
Location: San Francisco/Sacramento
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
20mm/25mm or 25mm/30mm spacers with OEM 19's
I'm currently running 245/35/19 front and 265/35/19 rear tires on oem 19's and am installing coilovers and front and rear camber kits as we speak. Aftermarket wheels are on the way but house payments come first For now I have to live with OEM's a while longer so am going to just get some spacers. It seems that most people are using 25/20 spacers but I'm wondering if 30/25 would be too wide. I will be rolling my rear fenders and want to drop the car as low as possible without any rubbing. I'm looking for as much aggressive look as I can get if that's even really possible with OEM's.
#5
Join Date: Jul 2006
Location: San Francisco/Sacramento
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
#11
i've been running 25 all around going on towards a year now and have had no problems, even with a good amount of spirited driving
#12
Join Date: Jul 2006
Location: San Francisco/Sacramento
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
For you guys running the 25mm, did you replace the stock studs with longer ones or go with the spacer with studs already attached (ichiba v2 I think). I would prefer to just replace with longer studs in order to reduce points for failure if that makes sense. Seems to me that bolting the spacer to the car, then bolting the wheel to the spacer would be weaker but I could be wrong... no science behind this just a gut feeling.
#15
Join Date: Jul 2006
Location: San Francisco/Sacramento
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts