K i know this has probably been posted 1000 times, (sorry admins) im buying iforged wheels, i have a 2003 g35 sedan, i wanna run a 20x8.5 +35 in the front and the rear i wanna run a 20x10. but this is the problem im not sure what off set to go with? Last year i ran 20x8.5- +35 offset, all around, they fit flush. So do i go with a +42-45? i have the luxury series TIEN lowering springs 1.4 R 0.7 F. I dont want to pay 1400$ a wheel and find out they wont fit in the rear, considering they drill and make the offset on purchase request. I talked to someone at iforged, they said theres no returns on the wheels inless theres a factory defect. I dont want to roll the fenders a huge amount but im able to roll them if needed. Pictures would help alot, and advise from someone thats done this on the sedan before. I also have the lower camber adjustment bar. Input would be great!! thanks for the replays ahead of time.

 

Post your question here: https://g35driver.com/forums/wheels-...-ask-here.html

 

If I was going to do it again, I would do a +20 to +25 in the front and +35 to +40 in the rear.