Can I fit 19X8.5 and 19x9.5 with both +35mm offset on a Sedan? Will they stick out too much?

 

Check at the top of this forum. There is a wheel fitment thread dedicated to the sedan.

 

Thanks, but I have been hearing that there are many people going with odd offsets that don't seem to jive with the fitment chart above. Any recommendations?

 

I'm not running 19's, but I can tell you that 18x8.5 w/ a 40mm offset worked fine on my stock 6MT sedan. I just had a set of HKS Hipermax LS coilovers installed. I did not want to roll my fenders, so the max drop without rubbing in the front was 1", the rear [to match the wheel well gap] turned out to be a drop of 0.75".

 

I am currently running 19x8front with +38 and 19x9rear with +45. No rubbing issues at all. Car is dropped about 1.5" front and 1.75 rear.







"Is simplicity best or simply the easiest"

 

You can also cruise the car pic threads above. It will be a bit tedious, but with all the pics, it's going to show exactly what the as-installed wheels look like.

 

got any pics?

 

check my profile... [img]/w3timages/icons/smile.gif[/img]






"Is simplicity best or simply the easiest"

 

Check out my car also!! =) IMO 19x8.5 / 19x9.5 with +38 offset is PERFECT, flush with the fender and very aggressive!


Martin
2003.5 BS G35
Nismo Aero/Sport Package
0-60 5.4 - 1/4 Mile 14.16 *GTech* and on 19's!!