Im convinced that I pooped

 

was your butt inflated to 150psi? haha

 

Thread save?

 

Lil too much negative camber for my taste. Don't get me wrong, not being a hater since everyone has their own taste, it isn't what I would do for my car. But I do understand that this is the whole VIP thing. It just isn't for me.

And btw, my tires (225/35 on a 9.5 and 245/35 on 10.5) are inflated to around 35 to 40 PSI.

 

I am gonna run 215/40s on a 19x12 and run 160psi. Eat it!

 

yah im thinkin about 20x12 -5 20x14 0

hows that sound?

 

That thing has my attention, I agree camber is a little over the top. But clean car none the less!

Dre, specs sound dope. I have some 195/55/18 winter tires you can probably stretch on there if you juice em up to around 190psi then deflate and re inflate to 150psi. That should stretch them out enough to catch the beads.

 

well i plan on running an air tank in the trunk with hoses of air to each tire keeping them a constant 190 psi

 

Oh good, and when you want to go lower just deflate a little.

 

well for the suspension i was thinking of just going to home depot and osh to get some piping, some valves etc and making my own air ride, oh all of this is on stock components and stock fenders

will this fit?

 

Yea you'll be good, just make sure you heat up your camber arms and bend them with a hammer.

 

oh yah well i was thinking to save money on camber arms and just buy my own rods and have a shop bend them for me

 

A shop? They're probably going to charge you for that.

 

naw this shop is really cool they painted my rotors and brake drums red they koo they know me

 

Oh word, think they could hook me with some washers to use as camber shims on EK?