Hey guys, I got a sedan dropped about 3 inches. Fenders are rolled . I would like to get 20x9 all around. With +13 what tire size should I run. I don't wanna run much camber so deff go more stretched. Also do they have +35 anymore? Thanks!

 

225s should be fine... 9" isnt that wide.

They should still make the 20x9s with 35mm offset... ask vendors. I dealt with TopSpeedAutoSport and they were awesome and very helpful.

If not, Next Level Motoring still offers the 35mm offset on their website. Good Luck!!!

 

Any one willing to trade for some oem rays??? I got 4 oem rays with new tires on them.. Lmk

 

Looked through the whole thread and couldn't find a definite answer, but will the 20x11s +15 Clear brembos in the front? Any info would be greatly appreciated

 

Getting D2's and i want to go lower then the Z s-techs that i have now, but nothing drastic, what should i run size wise im thinking 235/35/20 (20x9) up front then 265/35/20 on the rear (which will be 20x11)

 

i was wondering if these will fit a base model coupe with 20x11 & 20x9 with only having the fenders rolled and not have any rub problems? thanks!

 

You'll be fine. 275 & 245 rubber would be good IMO

 

^^mild stretch front and rear is a good setup. On stock height you won't rub at all. Unless you have bad shocks lol

 

It's lowered 1.1 in front and 1 in the rear. Think I could still get a figment?
VVVVVVVVVVVVVVVVVVVVVVV

 

I'm going with these wheels also..
-20x11 & 20x9 +13 offset
-Fenders are already rolled
-already lowered, 1.1 in front & 1.0 in rear
Question: would these fit with no rub, with 275F and 245R?

 

Don't think you will rub, you aren't aggressively lowered, have any supporting mods? Camber kit or toe kit?

 

Are hub centric rings needed for these wheels?

 

i don't think you would need them but it doesn't hurt if you can get your hands on a decent pair for a decent price. ya dig..

 

What size ties should I get for 20x9 et13 and 20x11 et13 on 04 coupe lowered on stech springs. I daily drive my car so want some rubber for protection and ride comfort but also want a little stretch. Looking for something that won't cause me to rub and don't really want to have to roll my fenders. I'll be using Achilles atr sports. So what size should I be getting?

 

So I got my wheels in and looks like I am between two setups. Looking to get 235/30/20 fronts and 275/30/20 rears or should I just do what most are doing 225/35/20 fronts and 255/35/20 rears. I daily drive my car and don't want to rubbing issues. What do you guys think?