offsets... lemme see if I got this right...
i see.. guess ill have to get the front arms as well.. do you know how much camber your running off the top of your head?...Also .. Statik a vendor here sells the V1 spacers up to a 20mm... do you recommend those over the 15mm V1?
Last edited by Buddi; Dec 10, 2010 at 05:08 PM.
Joined: Feb 2010
Posts: 5,249
Likes: 430
From: Houston
Itasha Coupe

My camber is -1.2 all around.
And I cannot answer your question because I don't have the answer to it. I haven't done any more research after I sold my 15mm V2 spacers.
And I cannot answer your question because I don't have the answer to it. I haven't done any more research after I sold my 15mm V2 spacers.
ONLY WAy A WORK o-DISC WILL FIT IS WITH a spacer. THat will clear EVER POINT OF THE bbk OTHERWISE SOME POINT WILL HIT THE RIM. TO Make sure A TEST FIT WILL Have to be done. It may LOOK LIKE U Have enough room with ya STOCK BRake but the BBk is much larger
^ CORRECT only APPLIES TO THE front brakes. THE REAr will fit ANY BRake.. I have O-disc 11/285/20 IN THE REar.. and O-dics in the front AND TRIED already.. IF NOT THE SPacer it wont work AT all
I think it'll clear most BBK's, but not all. I have A-disc in the rear and my BBK clears literally by 1mm. I've never tried putting an O-disc on, but I'm pretty sure it'll hit.
I just bought 37 wheels for my 35 winter setup. I haven't put them on yet but I am guessing I'm going to need spacers to be at least, semiflush. Can someone help me out with what the offset would be for G37 stockers on a G35? Thnx!
Joined: Feb 2010
Posts: 5,249
Likes: 430
From: Houston
Itasha Coupe

Yea good point. I completely looked over that. I just keep referencing Akebonos and I'm not considering the larger caliper BBK's.
Joined: Feb 2010
Posts: 5,249
Likes: 430
From: Houston
Itasha Coupe

Haha, one of these days I'll do a test fit on my friend Kevin's car. He's got an 06 with candy red bonos.
Thread
Thread Starter
Forum
Replies
Last Post
emilepmartin
Engine, Drivetrain & Forced-Induction
21
Mar 10, 2004 07:43 AM









