offsets... lemme see if I got this right...

Subscribe
Dec 10, 2010 | 04:34 PM
  #76  
hey Konx.. are you running front and back spc?
Reply 0
Dec 10, 2010 | 04:51 PM
  #77  
Yes, I have both front and rear SPC arms. As well as the shim kit for the front SPC and toe bolts for the rear.
Reply 0
Dec 10, 2010 | 05:00 PM
  #78  
i see.. guess ill have to get the front arms as well.. do you know how much camber your running off the top of your head?...Also .. Statik a vendor here sells the V1 spacers up to a 20mm... do you recommend those over the 15mm V1?
Reply 0
Dec 10, 2010 | 06:39 PM
  #79  
My camber is -1.2 all around.

And I cannot answer your question because I don't have the answer to it. I haven't done any more research after I sold my 15mm V2 spacers.
Reply 0
Dec 10, 2010 | 06:55 PM
  #80  
I think -5 is a nice setup.. especially for a daily driver..
Reply 0
Dec 10, 2010 | 07:14 PM
  #81  
ONLY WAy A WORK o-DISC WILL FIT IS WITH a spacer. THat will clear EVER POINT OF THE bbk OTHERWISE SOME POINT WILL HIT THE RIM. TO Make sure A TEST FIT WILL Have to be done. It may LOOK LIKE U Have enough room with ya STOCK BRake but the BBk is much larger
Reply 0
Dec 10, 2010 | 08:38 PM
  #82  
^^ That only applies to the front though. O-Disc will clear a BBK in the rear.
Reply 0
Dec 10, 2010 | 08:48 PM
  #83  
^ CORRECT only APPLIES TO THE front brakes. THE REAr will fit ANY BRake.. I have O-disc 11/285/20 IN THE REar.. and O-dics in the front AND TRIED already.. IF NOT THE SPacer it wont work AT all
Reply 0
Dec 10, 2010 | 09:12 PM
  #84  
Quote: ^^ That only applies to the front though. O-Disc will clear a BBK in the rear.
I think it'll clear most BBK's, but not all. I have A-disc in the rear and my BBK clears literally by 1mm. I've never tried putting an O-disc on, but I'm pretty sure it'll hit.
Reply 0
Dec 10, 2010 | 09:17 PM
  #85  
Depends what bbk u have also.. Some are thinner than others..
Reply 0
Dec 10, 2010 | 09:19 PM
  #86  
I just bought 37 wheels for my 35 winter setup. I haven't put them on yet but I am guessing I'm going to need spacers to be at least, semiflush. Can someone help me out with what the offset would be for G37 stockers on a G35? Thnx!
Reply 0
Dec 10, 2010 | 09:39 PM
  #87  
Quote: I think it'll clear most BBK's, but not all. I have A-disc in the rear and my BBK clears literally by 1mm. I've never tried putting an O-disc on, but I'm pretty sure it'll hit.
Yea good point. I completely looked over that. I just keep referencing Akebonos and I'm not considering the larger caliper BBK's.
Reply 0
Dec 10, 2010 | 10:18 PM
  #88  
^ Have you tried fitting an O-disc over Akebonos yet? They look like pretty fat calipers haha.
Reply 0
Dec 10, 2010 | 10:21 PM
  #89  
Yeah I was wondering how akebonos fit over o disk.. I'm at +11 o disk in the front and was wondering how they would fit.. I'm hunting down g37s to test fit.. lol
Reply 0
Dec 11, 2010 | 12:14 AM
  #90  
Quote: ^ Have you tried fitting an O-disc over Akebonos yet? They look like pretty fat calipers haha.
Haha, one of these days I'll do a test fit on my friend Kevin's car. He's got an 06 with candy red bonos.
Reply 0
Subscribe