kinetix front control arms squeaking..
#1
kinetix front control arms squeaking..
most noticeable in the morning, sound like it's from bushings....is there someting i can spray/apply to lessen sqeaking without damaging the bushings? They seem to fit in there quite snugly.......
04 6mt Sedan / stock airbox mod / z-tube / k&n panel filter / crank pulley / 18" r/h c2s / s-tein springs
04 6mt Sedan / stock airbox mod / z-tube / k&n panel filter / crank pulley / 18" r/h c2s / s-tein springs
#2
Re: kinetix front control arms squeaking..
I always use lithium grease inside and out of the bushings.
You'll need to remove the arm to grease it right.
You can also use WD40, but it'll wear off a lot quicker
and possibly loosen your bolt if you don't spray carefully.
2004 G35C 6MT Brilliant Silver
You'll need to remove the arm to grease it right.
You can also use WD40, but it'll wear off a lot quicker
and possibly loosen your bolt if you don't spray carefully.
2004 G35C 6MT Brilliant Silver
Thread
Thread Starter
Forum
Replies
Last Post
rezendvous420
G35 Sedan V35 2003-06
10
05-31-2020 01:26 PM
netcbc
Steering & Suspension CDN
0
07-24-2015 01:59 PM