Picking up a 2004 coupe today after my sedan was totaled a monrth ago. I was looking to run a set of works wheels. Maybe a gnosis or vs-xx but I'm going tohave to wait a while before I can get those.

In the meantime I'm trying to find a more economic wheel to get me by in the mean time. I would like to stay below $300 per wheel. Looking for 19" set to run 245/35/19 275/35/19. Like to stay with a hyper silver like finish. I like mesh whells but I might go with something like a SSR SP1.

I had a set of hp racing evos on my sedan and I bought them for about $600. I don't know how those would look on a coupe. I see alot of cheaper wheels but I'm not sure what to stay away from.

I eventually will add a mild drop to the car but thats it. I just like to have something other than stock until I can get wheels I really want. Any recommendatins would be appreciated. I know its a lame question but I could use the help

thanks

 

Take a look at my setup and PM me if you are interested. I am willing to negotiate a good deal.

https://g35driver.com/forums/20-inch...en-fk452s.html

 

Had these on my sedan and they were fine. Not sure how these would look on a coupe. The cheap. The offsets are F +20 and R +38 I was told. Not sure if thats right. Any opinions. Would 9.5 work on the back with a 275/35/19.
http://www.wheelsnext.com/wheels-rim...persilver.html

 

9.5 +38 will tuck in the rear of a coupe.

I would buy Sean's wheels that he linked for you.

 

Not interested in 20s

 

Just curious, but the +20 on the 8.5 up front and the +38 on the 9.5 in the back doesn't sound right. Most of the 19" setups I see have the front and back offsets close in number on the coupes. Seems like the +38 is more for a sedan. Wouldn't it tuck in to much? Especially with a 9.5 rear?

 

Yes it will tuck in too much.

 

Those are sedan sizes.

 

Thanks 4D05G35 and B_Lam.

That didn'tsound right. Anyways I found a few other wheels that I'll post and see if anyone has any info on them in a bit

Thanks again