Tsw zolder
#1
Tsw zolder
I just got my TSW Zolder's today...super excited about the way they look. I haven't seen any cars on the forums that have these, and I know people are in question about what their would look like or if it's the right fir for them, so I thought I would share a few pics you so you guys can get an idea.
#4
#5
#7
Trending Topics
#8
#9
#12
Need the offsets, it will be the number on the back of the wheel should have ET +XX The XXs with be the offset in MMs.
$125 for V1s is kinda expensive is that a pair or a set of 4? You'll need to run extended studs with V1s, so you'll need to knock the rotor off and deal with all that.
Look into project kics spacers, they're the best quality I've used. But Ichiba V2s are fairly decent quality for the money as well.
$125 for V1s is kinda expensive is that a pair or a set of 4? You'll need to run extended studs with V1s, so you'll need to knock the rotor off and deal with all that.
Look into project kics spacers, they're the best quality I've used. But Ichiba V2s are fairly decent quality for the money as well.
#13
#14
No, the vibration will happen if the wheel isn't centered. You either need hub rings or you need to know how to mount wheels properly without throwing them off center.
They either come in a +40 or +25 to me they look like +25
I'd recommend rolling the fenders and throwing 20mm spacers on.
They either come in a +40 or +25 to me they look like +25
I'd recommend rolling the fenders and throwing 20mm spacers on.