EVO X MR Wheels on a G35 (WITH PICS)
#1
EVO X MR Wheels on a G35 (WITH PICS)
Hi everyone,
Just thought Id share my new purchase
Authentic BBS EVO MR Forged Wheels 18" 5x114.3
Forged Wheels, off a Mitsubishi Lancer Evolution X MR
I had to machine 370z lugnuts in order to get these to work. Sorry about the poor quality nighttime photo, ill take some more when I get a chance.
Bolt Pattern - 5x114.3
Offset = +38mm
Width = 8.5"
Diameter - 18"
Weight - 18.5 lbs each (Extremely light for 18" rims)
Let me know what you guys think.
Just thought Id share my new purchase
Authentic BBS EVO MR Forged Wheels 18" 5x114.3
Forged Wheels, off a Mitsubishi Lancer Evolution X MR
I had to machine 370z lugnuts in order to get these to work. Sorry about the poor quality nighttime photo, ill take some more when I get a chance.
Bolt Pattern - 5x114.3
Offset = +38mm
Width = 8.5"
Diameter - 18"
Weight - 18.5 lbs each (Extremely light for 18" rims)
Let me know what you guys think.
#5
I agree, way too much wheel gap in those fenders. Personally I would have to do at least a 1" drop and big spacers but if you are happy with them that is all that matters. I doubt many people on here would appreciate my current wheel setup so who cares what people think of your wheels really?
#6
Very true, thanks for your input. To be honest I bought the rims more for their weight (or lack thereof) they were 6 lbs less per wheel than the stock 350z 18"s I had on. Loosing that much rotating mass changed the charactistics of the car for the better in my opinion. I wanted the spacers to regain the track width of the stock setup (maye gain a few mm)
#7
Trending Topics
#8
#9
The lug nuts required for these rims are "mag or flat style lug nuts" The do not have the 60 degree conical shape which is self centering.
Most likely the aftermarket ones you have or "tuner style" will not work as I have seen very few lug nuts which will work with the thread pattern let alone the stud hole size in the rim.
Most likely the aftermarket ones you have or "tuner style" will not work as I have seen very few lug nuts which will work with the thread pattern let alone the stud hole size in the rim.
#10
Thread
Thread Starter
Forum
Replies
Last Post
911Turbo
19 Inch
10
08-24-2016 08:31 AM
laksjd84
Exterior - Body Parts
1
07-24-2015 05:12 PM