hi guys ... i am trying to lower the G with the 19x9.5 (font) and 19x10.5 (rear) offset is 22 all around. with the Htech which .6 (font) and .3(rear) will it rub or hit the fender?? thanks

 

It shouldn't. I have 19's and im planning to drop the car 1" all around. I saw pix of someone with the same setup and you have like 1" gap between wheels and fender.

-twantrd

 

roll fender ?

 

twantrd,

Will you have to roll your fenders with 19's? What springs are you getting to lower your car?

-Alex

 

Yg35 -
I would go with the H Techs for the 350Z - a little more drop with a firmer spring rate. Plus, no alignment / camber issues due to excess lowering.

 

Keith N

thanks and thanks for the PM.. nice of you

 

how much the Htechs drop ? and really no alignment or camber issues with those ? i am planning on get 19 stms and want to lower my car for looks...

 

i put the 350z h techs on my g35 coupe on wed. from ground to fenderlip in front im at 26 1/8 and rear about 27 incches from ground to fenderlip.

not sure what the stock set up measured im on 225 45 18 and 245 45 18. oh btw im giong to cut the rear bumpstop top part down so i get another 1/2 inch drop should be perfect

 

With a +22 offset on a 10.5 rim and lowering you car. Make sure your tires are 275/35 or 275/30. That offset has 350Z rubbing on the rear fenders and I know it will have the G35 doing the same thing. Best to roll or shave your fenders to be safe.

 

i have 275 35 in the rear ..
and yeah i wanna know that if really no alignment or camber issues with those

 

YG- you still need to get an aligment after the install....just more possibilities that
you will get it back to factory specs, that's all. good luck.

275/35/19's are perfect size.