Is there any difference between the Tein S Tech springs for the Sedan and Coupe? What happens if you put the sedan springs on the coupe? Any ideas. Just curious because I will be buying these springs and want to do a visual inspection to make sure that they are the coupe...unless it doesn't matter. If it does matter, does anybody have a picture comparison for the coupe vs sedan? Thanks.

-twantrd

 

I thought they were the same kit.

 

Yea, I was kind of wondering if they are the same kit. If so, then that's all I need to know. Thanks.

-twantrd

 

OK CHECK IT Out

i put the 350z tein h's on my g35 coupe earlier this week

now in front from ground to fenderlip its at 26 1/8 and rear its at about 27 inches from ground to fenderlip. so that will show you how much lower than stock it will put u. IF you can measure yours the way it is stock and post it here so we get a true measurment of final drop.

btw in rear im going to cut the bumpstop mounts down so i can get another 1/2 inch out of it