Where do you guys mount your amps??
#1
Where do you guys mount your amps??
Hi guys,
I will be installing the following this weekend, but I couldn't decide where to mount my amps.
Here are the stuff I have:
Focal components for fronts
Boston acoustics sc65 for rear panels
Rockford fosgate 10" subs (two of them in a sealed box)
Soundstream 4.920 amp
Pioneer 150w amp (i know its old)
Pioneer P4200dvd
So like the title says, where do you guys usually mount your amps?
backseat?
Please give me your suggestions. Thanks!
I will be installing the following this weekend, but I couldn't decide where to mount my amps.
Here are the stuff I have:
Focal components for fronts
Boston acoustics sc65 for rear panels
Rockford fosgate 10" subs (two of them in a sealed box)
Soundstream 4.920 amp
Pioneer 150w amp (i know its old)
Pioneer P4200dvd
So like the title says, where do you guys usually mount your amps?
backseat?
Please give me your suggestions. Thanks!
#2
#3
Hehe..I forgot to mention which type I have. My G35 is a 2003 coupe.
I have sealed box that will probably sit right behind the dack seat so I am already going to lose that option.
How hard is it to build a rack under the rear deck in a scale of 1-10?
1= Really easy
2-9=???
10= You need a pro
I have sealed box that will probably sit right behind the dack seat so I am already going to lose that option.
How hard is it to build a rack under the rear deck in a scale of 1-10?
1= Really easy
2-9=???
10= You need a pro
#4
Here's an old shot of my set-up. I've since moved the JBL MS-8 under the rear deck and added another Planet Audio tube amp for the sub. I had to make an all new board as it was to short for both amps and I devised a way to make the board easily replaceable if and when my amp set-up changes.
The MS-8 is mounted on drop down brackets that bolt in to where the factory amp bolts to. I used all existing mounting holes. It's just barely visible with the cover in place. I can get some shots for you tom. or something.
The MS-8 is mounted on drop down brackets that bolt in to where the factory amp bolts to. I used all existing mounting holes. It's just barely visible with the cover in place. I can get some shots for you tom. or something.
#5
Here's an old shot of my set-up. I've since moved the JBL MS-8 under the rear deck and added another Planet Audio tube amp for the sub. I had to make an all new board as it was to short for both amps and I devised a way to make the board easily replaceable if and when my amp set-up changes.
The MS-8 is mounted on drop down brackets that bolt in to where the factory amp bolts to. I used all existing mounting holes. It's just barely visible with the cover in place. I can get some shots for you tom. or something.
The MS-8 is mounted on drop down brackets that bolt in to where the factory amp bolts to. I used all existing mounting holes. It's just barely visible with the cover in place. I can get some shots for you tom. or something.
Please do so..So that I can get more idea on how to go about it.
#7
Trending Topics
#8
The following users liked this post:
Urbanengineer (10-30-2018)
#10
Here are a few updated one's that I had to take with my phone. The MS-8 is mounted onto a piece of MDF which is then secured to the drop down brackets. I just bent some scrap I had laying around into "C" shaped brackets. I only used 3 brackets because 1 would have gotten in the way of the power, ground, and remote terminals. Keep in mind your gonna have to remove the factory sub and work around the seat belts also. I hope this helps a little.
#11
#14
Here are a few updated one's that I had to take with my phone. The MS-8 is mounted onto a piece of MDF which is then secured to the drop down brackets. I just bent some scrap I had laying around into "C" shaped brackets. I only used 3 brackets because 1 would have gotten in the way of the power, ground, and remote terminals. Keep in mind your gonna have to remove the factory sub and work around the seat belts also. I hope this helps a little.