I am so lost with this install.........
#16
Originally Posted by Pearl05G
No adaptors are needed. Two ways it can be simply done...either splice Male RCA leads to your factory speakers and plug into the preouts of the new HU, or the even simplier way..spring for the Metra 70-7551 which already has this done.
#18
So to install an aftermarket deck in our infinitis, all you need to do is convert the deck's preamp outs to speaker wires to facilitate connecting it to the input wires going to the stock bose amp?
No problem with the aftermarket deck outputting higher voltage (4v preamp outs, 3v preamp outs, whatever) and the stock Bose expecting < 1?
No problem with the aftermarket deck outputting higher voltage (4v preamp outs, 3v preamp outs, whatever) and the stock Bose expecting < 1?
#20
Registered User
iTrader: (2)
Join Date: May 2005
Location: Central Jersey
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by amthar
So to install an aftermarket deck in our infinitis, all you need to do is convert the deck's preamp outs to speaker wires to facilitate connecting it to the input wires going to the stock bose amp?
No problem with the aftermarket deck outputting higher voltage (4v preamp outs, 3v preamp outs, whatever) and the stock Bose expecting < 1?
No problem with the aftermarket deck outputting higher voltage (4v preamp outs, 3v preamp outs, whatever) and the stock Bose expecting < 1?
#22
#23
What I want to know is, just how crappy are the wires connecting everything? I plan to replace the HU, amp and speakers, but I would really, really like to use the existing wiring if at all possible. (I find running wiring a real pain, lots of time spent for small gain. Maybe I'm just not a patient person.)
Thread
Thread Starter
Forum
Replies
Last Post