Originally Posted by morningla

does anyone know if there is a DIY with pictures on how to install LED into the clear strip. and with wiring instructions? i guess that part won't be too hard, i'll just have to test each wire while holding the headlight

not the LED strip that goes along the side of the headlight and shines through, but actual individual LED installed down the center of the clear strip. I'm not sure how you would mount them in place. but actually, i have not even taken out my headlights to look yet.

anyone know what type of LED i should get if i want to match the stock OEM halogen 2004 HID? i assume they are OEM, i just got the car and i didn't see an aftermarket ballast.

i am planning to disable my amber light, and just leave it for signaling.
change the strip to white LED as the DRL.
ignore the high beem and not use it
leave the stock OEM alone and switch off the LED when these are on.

hoping that's possible.

Originally Posted by pho3nix3871

Red wire to red wire in the side marker light wiring and black to black. It is pretty easy. Connect the side marker wire in parallel with the LED light wires.