View Poll Results: wat problems r u having?
installed spacers, have ABS, Slip, VDC lights on
29
18.01%
installed spacers, have knocking
7
4.35%
installed spacers, have both lights and knocking
6
3.73%
didn't install spacers, have no problem
40
24.84%
didn't install spacers, have one of the problems above
7
4.35%
didn't install the camber kit yet.
43
26.71%
installed spacers, no problem
29
18.01%
Voters: 161. You may not vote on this poll
SPC Poll
#271
Originally Posted by G35Rider92649
Installed front camber with spacers here.
Big problems. Car drives like s**t.
VDC Lights, Slip, and ABS on, what do i do.
Already ran an alignment, didnt help.
What now?
SCREW G35 SUSPENSIONS, THEY ARE A JOKE
SCREW SPC, THIS IS A JOKE
THMOTORSPORTS IS BADASS THO, I LIKE EDDIE!
Big problems. Car drives like s**t.
VDC Lights, Slip, and ABS on, what do i do.
Already ran an alignment, didnt help.
What now?
SCREW G35 SUSPENSIONS, THEY ARE A JOKE
SCREW SPC, THIS IS A JOKE
THMOTORSPORTS IS BADASS THO, I LIKE EDDIE!
#272
#273
I installed the spacers and I got the VDC, SLIP and VDC lights. The lights went out after turning the car off but I've gotten the lights three times since the install but they always reset themselves. I went 4 weeks without a knock but it's there now. The knock occurs when I hit medium bumps, pot holes or man hole covers. The knock sounds like a bad shock bottoming out. The coilovers are new and were installed with the SPC arms.
#275
#276
#278
#281
#282
#284
#285
Registered User
iTrader: (4)
Join Date: Jul 2005
Location: Where East Meets West
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Hello Guys,
Thought I would chime in here. The spacers included with the SPC kit are designed to increase camber adjustment by 2 degrees. When doing so, you must install the abs sensor spacers to keep the spacers exactly where they were before the installation. The sensors are very sensitive and must be in the same location to pickup the signal from the hub.
Therefore, if the sensor spacers are simply bolted up, you will be fine. If the spacers are bent during installation, the sensors will not be positioned correctly and your dash will light up. If you are having this issue, the spacers were not properly installed so take your vehicle back to the installation shop and ask that it be corrected.
Please PM me if you have any questions. I will be more than happy to assist.
Thought I would chime in here. The spacers included with the SPC kit are designed to increase camber adjustment by 2 degrees. When doing so, you must install the abs sensor spacers to keep the spacers exactly where they were before the installation. The sensors are very sensitive and must be in the same location to pickup the signal from the hub.
Therefore, if the sensor spacers are simply bolted up, you will be fine. If the spacers are bent during installation, the sensors will not be positioned correctly and your dash will light up. If you are having this issue, the spacers were not properly installed so take your vehicle back to the installation shop and ask that it be corrected.
Please PM me if you have any questions. I will be more than happy to assist.