350z H-techs before and after pix FINALLY
its not worth it to me. I'll planning on getting HKS RS coilovers by summer. I just didn't want to ride around lifted till then. I can always sell the springs when i'm ready to put the the coilovers on.
And from what i've read. the H-tech don't cause camber issues after alignment were as other spring that drop below 1'' will even after alignment.
And from what i've read. the H-tech don't cause camber issues after alignment were as other spring that drop below 1'' will even after alignment.
Originally Posted by Queenskid24
car looks hoootttttt. i like the CF hood on it. nice combo
again thanks, for everyone 1 person that says it looks good, there are 5 to 10 that say it doesn't. But I'm not putting my car together for them. But for the people that say it looks good you comments are greatly appreciated.
Originally Posted by WhiteonWheat
Someone please explain to me what this is for someone who doesn't dabble much in springs/lowering.
1.) Is this an OEM Nissan 350Z springs "swap".
2.) Is it basically just lower than our stock springs?
Thanks guys,
-WoW
1.) Is this an OEM Nissan 350Z springs "swap".
2.) Is it basically just lower than our stock springs?
Thanks guys,
-WoW
2.) OEM 350z spring are lower a little and are a little firmer
Tein 350z H-Tech spring are lower about 1'' and even more firm.
Originally Posted by jdmeg21
1.) No, its is not a oem 350z spring swap. These are the Tein 350z H-Tech lowering springs.
2.) OEM 350z spring are lower a little and are a little firmer
Tein 350z H-Tech spring are lower about 1'' and even more firm.
2.) OEM 350z spring are lower a little and are a little firmer
Tein 350z H-Tech spring are lower about 1'' and even more firm.
Not so true--the revised Z springs do not lower the rear as much as the Z H Techs.
I have the Z springs and am about to switch to the H Techs with hopes of getting the back down lower.
Originally Posted by JZ39
I have the Z springs and am about to switch to the H Techs with hopes of getting the back down lower.
Well, the Z springs look stock, if not a little higher.
If the rear comes down at all, I'll be happy.
I am debating whether or not to do the fronts with the Teins--the Z springs definately dropped the front.
If the rear comes down at all, I'll be happy.
I am debating whether or not to do the fronts with the Teins--the Z springs definately dropped the front.
Registered User
Joined: Nov 2004
Posts: 331
Likes: 0
From: East Highland, CA
Because the ones for the G35C are softer than the OEM springs. And with the Z Springs you get about a half inch more drop VS the G35C springs.
Originally Posted by g35ctuner
how come nobody buys the tien h-tec's that are made specifically for the g35c???