Spring Install, parts to be replaced during swap...
#1
Spring Install, parts to be replaced during swap...
The factory service manual says to replace the following parts every time they are disassembled. How important is it that I do this?
- Front suspension, Top nut in the middle of the "Mounting insulator" (top of the strut assembly)
- Rear suspension, fixing bolt, on the lower arm
Are these parts reusable or not? I can order the front top nut easily, but I am having trouble finding the rear fixing bolt online.
Anyone know?
(I plan on installing my Eibach Pro kit this weekend).
Front (2006 G35X AWD)
Rear (2006 G35, both RWD AND AWD)
- Front suspension, Top nut in the middle of the "Mounting insulator" (top of the strut assembly)
- Rear suspension, fixing bolt, on the lower arm
Are these parts reusable or not? I can order the front top nut easily, but I am having trouble finding the rear fixing bolt online.
Anyone know?
(I plan on installing my Eibach Pro kit this weekend).
Front (2006 G35X AWD)
Rear (2006 G35, both RWD AND AWD)
#2
installed coilovers myself 2 weekends ago, follow these directions,
and i'm not very mechanically inclined either, this is my first mod i installed my self and i must say it's very gratifying
https://g35driver.com/forums/brakes-suspension-diy/143335-diy-suspension-installed.html
and i'm not very mechanically inclined either, this is my first mod i installed my self and i must say it's very gratifying
https://g35driver.com/forums/brakes-suspension-diy/143335-diy-suspension-installed.html
#3
Originally Posted by g7x5
installed coilovers myself 2 weekends ago, follow these directions,
and i'm not very mechanically inclined either, this is my first mod i installed my self and i must say it's very gratifying
https://g35driver.com/forums/showthread.php?t=143335
and i'm not very mechanically inclined either, this is my first mod i installed my self and i must say it's very gratifying
https://g35driver.com/forums/showthread.php?t=143335
I was wondering if the nuts really need replaced or not. I know how to do the job, I just havent had those parts off before and wanted to know if I will be able to reuse them or not. Sometimes parts are reusable even if the FSM says to replace them....
Thanks for the link though. Good stuff.
#5
Thread
Thread Starter
Forum
Replies
Last Post
Karl_g335x
G35 Sedan V36 2007- 08
4
08-03-2015 03:43 PM
joedaddy1
Engine, Drivetrain & Forced-Induction
0
07-28-2015 02:58 PM
netcbc
Steering & Suspension CDN
0
07-24-2015 11:25 AM