Klumzyee's Suspension Build [G35Coupe] Version II
#1
Klumzyee's Suspension Build [G35Coupe] Version II
Current Set-Up [Version 1]
Coilovers:
TEIN Basics
- Great coilovers for daily use.. tooo tooo soft for track but still do able. Height is the only adjustable thing on these coils but they'll go lower then you'll ever need and higher then stock. Very good range no noise and best of all the resale value is amazing on these.
Strut/Sway:
Stillen Front/Rear Sways
- Neh.. stiffer then stock on stiff stiff.. no issues with it what-so-ever but its time to upgrade.. I thought these would make a bigger difference then what they did, however they're excellent and a bang for the buck
Stillen Trunk Strut
- Junk.. POS... do not ever buy.. I think the spoons at your local denny's are made of better metal then this thing..
Control Arms/Alignment:
350EVO Front Control Arm
- Hands down these are the best arms in terms of quality and design. Very easily adjusted and VERY sturdy
Stillen Rear Camber Arm
- They were good.. BUT.. I needed more adjustment at the time and these were a little short.. however these will do the job for normal bases. I replaced them with SPC Rear Camber Arms.
SPC Performance Rear Camber Arm
- "Buffer"/Bigger than the Stillens.. and like your girls says.. bigger is better.. [if you've heard other wise she's lying to you..] I was impressed by the quality of these.. under heavy abuse they still hold up perfectly fine and easy to adjust.
SPC Performance Rear Adjustable Bolts
- They do the job and a great deal!
Wheels & Tires:
DPE [Dynamic Performance Engineering] S-Series 3Piece Forged Wheels 20"x9.5" Front 20"x11.5" Rear
- Great wheels they are heavier then stocks but hold up VERY well.. everyone knows I dont stop for pot holes or rail road tracks lol.. I've bent two out of four (one was due to a flat tire ) Other one I probably hit something stupidly hard lol But overall GREAT sturdy light weight wheels.. but you get what you paid for
Tires
- This topic deserves a sepearate thread.. but to sum it up Pilot Sport 2 are win.. out of [RE050, T1R , P-Zero SYSTEM] I'd go with the PS2.. my next set is aimed at RE070-Rs
Last edited by EricIsKlumzyee; 09-23-2008 at 06:17 PM.
#2
UpComing Set-Up [Version 2]
Coilovers:
BC Coilsovers w/12/12 Rates
-
Strut/Sway:
Cusco Sways
- Versus Stillen.. These are SOILD sways.. stiffer =) but more $$$
I need poly urethane bushings ._.
Stillen Trunk Strut.. NAHHH
- Will be COPIED into something stronger and more useable..
Relentless Front 3-Piece Tower Strut
- Chromeoly Bar FTW!!!
GT-Spec TWO Rear Braces
- neh see how they'll do
Tanabe Mid Chassie Brace
- Gona change the bolts on these.. the two that bolts onto the subframe looks good but the two back ends look a little weak.. I have fatter bolts with giant washers for these But they'll only be on certain days until I figure out if I can even drive with these things on.. they add a 1" drop to the MIDDLE of your car ._.
Control Arms/Alignment:
350EVO Front Control Arm
SPC Performance Rear Camber Arm
CUSTOM Rear adjustable bolts
- SPC ones are badass but I need a longer bolt so I can put on the GT-Spec Bars..
Wheels & Tires:
DPE [Dynamic Performance Engineering] S-Series 3Piece Forged Wheels 20"x9.5" Front 20"x11.5" Rear
Tires
- 255/30/20 PS2 325/25/20 PS2 [If body work is NOT done]
- 255/40/20 RE070-R + RunFlat -_- 285/35/20 RE070 [If body work is done]
- 275/??/20 PS2 335/25/20 PS2 [If body work is done]
BBK:
They're Blue.. They're 6POT/4POT.. They're 14".. Two Piece Rotors.. and they work
Last edited by EricIsKlumzyee; 09-23-2008 at 06:28 PM.
#3
Originally Posted by EricIsKlumzyee
Current Set-Up [Version 1]
Tires- This topic deserves a sepearate thread.. but to sum it up Pilot Sport 2 are win.. out of [RE050, T1R , P-Zero SYSTEM] I'd go with the PS2.. my next set is aimed at RE070-R RFT
I use RE070. Civic type-R uses RE070.
You use RE070-R....
You're not supposed to be taking away my advantages.
My car is still fluffier.
#8
^POSTED.. See you fckers on the 29th
R&D Track Day @ Streets of Willow
Now the question.. should klumzyee go FI now or later..
R&D Track Day @ Streets of Willow
Now the question.. should klumzyee go FI now or later..
#9
I need to make the Rear bolts.. SPC was very helpful and gave me everything I need to make my own "bolt kit" =) I dont think I'll be posting the information but its nothing you cant research on your own lol.. hopefully Scott @ Relentless can find me the two bolts I'm missing for my strut bar =( and Illmatic/Dustin still has one of the mounts to the trunk strut of mine haha.. neh neh..
oh I'll have the MID Tanabe Chassie Brace for track day only too =)
oh I'll have the MID Tanabe Chassie Brace for track day only too =)
Last edited by EricIsKlumzyee; 09-23-2008 at 06:38 PM.
#10
#11
#14
^ NOPE but if you want me to copy one for you too I'll PM you when I get a price.
LOL no its just modivation I dont really care what I run since I have nothing to compare it to..
Originally Posted by Mike@RiversideInfiniti
Wtf this is going from a track day to a time attack.
FI NOW.
I cant FI until the 08 kit is released
FI NOW.
I cant FI until the 08 kit is released
#15