i purchased jic magic FLT A2 and i try to max it out by take off the adjustment rings from the rear and everything but it didnt get low enough. i dont really know what to do now...i wonder what spring will give the lowest drop out there maybe i can buy them and replace them with those ****ty JIc srpings?????

 

This is OEM style rear?

There is a quite a few guys running JICs and are dirty low...

 

yes OEM rear

 

are you sure you have them installed right? posting picture sure would help us

 

Uploaded with ImageShack.us


Uploaded with ImageShack.us
this is how it sits wit negative -5.4 camber before alignment but after the alignment i got -3 so it went higher then this little bit more
P.S rear adjustment rings is off the springs ALREADY

 

i will take it put and take some picture to show ...hopefully ya can help me out thanks a lot

 

do you happen to have pictures of the coils actually installed?

 

Pick up some Stance GR+ or F&F's if you want maximum ride height adjustment.

 

And you removed both collars and they didn't go low enough?


I just looked on the site and there are different part numbers for coupes, sedans and Zs...

What do you have?

 

https://g35driver.com/forums/v36-diy...r-install.html
i followed this and i think i installed right just the stupid JIC

 

jic flt a2

 

i took off the adjustment rings only, there is another ring that the springs can sit on if i take it off the springs will move around

 

In those pics is the ground level? From what I can see, the ride height is all messed up. Your left front is higher than your left rear and it looks like your right front is lower than your right rear.

 

yeah it was before the alignment but now i have everything straight up

 

so you guys think shorter springs will help?