Best way to make the front of the car feel nice and grounded? Feels wobbly at 110+.
Ideas? Maybe new Struts, Sways, Lowering Springs? Thanks

 

All of the above.

New shocks, higher spring rates, poly bushings, new ball joints, sway bars, control arms, proper alignment. They all work together.

 

Getting the Shocks.. Whats some good Springs too get? Also Bushings have been done. Guess Ball Joints too. Control arm? Why? Alignment done.

 

Also what can be done to improve traction?

 

I've got lowering Springs for the rear, and 255/35/18 tires. But no traction -,-

 

What all have you modded (suspension-wise) so far?

 

Poly Mods for control arm, and poly mods for rear shocks

 

What else should i get

 

Adjustable upper control arms up front (kinetix v2 or SPC), front lower ball joints (steering knuckle), rear adjustable control arms (SPC or Eibach) and toe bolts, shocks, sways and an eibach pro kit if you want a modest drop. Or try to find some stock sport springs if you want stock height.

If you drop it with the eibachs tho you're gonna want some 25mm spacers.

Then get a full alignment and shoot for about -1.4 camber in the rear and -.08 up front.

 

Shocks...The KYB's
Springs... Some 350Z Tein S
Driver and Passanger Lower Ball Joints... Check this link http://www.partsgeek.com/catalog/200...all_joint.html
Think Id go with the first.
Sways, I'm going with stock just new.

 

What's the point? That's not gonna make a difference. You need a thicker sway bar, not just a new one.

Also, the adjustable arms are gonna make a huge difference because of the alignment numbers you'll be able to reach. Proper alignment makes all the difference in the world.

 

I've wanted to try those mevotech ball joints, cuz they're the only ones I've seen with a zerk fitting on the bottom. Not sure why no one else does that (that I've seen).

 

I'm talking about sway links.. Not sway bar. Those bars are kinda pricyyyy

 

Ahh, yes. Try to find some used ones tho. They make a huge difference.

 

And yes the MevoTech's is what im getting...