TEIN Type CS Damper vs Tein Type Flex

Old Jan 24, 2006 | 05:11 PM
  #1  
mkn1620's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Nov 2005
Posts: 536
Likes: 0
TEIN Type CS Damper vs Tein Type Flex

same with title, which one is better and how is it better? can someone help me with that please!

P.S. is Tein H-Tech the same with those?
 
Reply
Old Jan 24, 2006 | 07:32 PM
  #2  
GReddySetGO's Avatar
Registered User
iTrader: (68)
Joined: Oct 2004
Posts: 2,445
Likes: 0
From: Arcadia, CA
H. Tech and S. Tech are just springs only.

CS and FLEX are full coilovers. They both are 16-level damping force adjustable and they are both EDFC compatible.

The diffrence is the valving in them. The CS model is much more comfortable. It keeps a good comfort level, but is adjustable to be stiffer for track/race use. It's a lot better than stock or any springs(S. Tech or H. Tech).

Also the spring rates on FLEX as stiffer than CS.

FLEX is "better" in terms of performance. FLEX will give you better feel on the track. However FLEX will be too stiff for some users for daily driving. It is NOT comfortable like stock or CS.
 

Last edited by GReddySetGO; Jan 25, 2006 at 02:42 AM.
Reply
Old Jan 25, 2006 | 12:01 AM
  #3  
Beta99's Avatar
Registered User
iTrader: (6)
Joined: Apr 2005
Posts: 273
Likes: 0
Tein Flex (twin tube construction, adjustable dampners
Full-length adjustment and height adjustment for separate setting of the height and spring preload
Spring rates 672/672
Stiffer then oem by F+114% R+98
Transfers +16% roll stiffness to front
Side Note: Extremely high spring rates mean even when the adjustable damping is set as low as possible, you may not find ride quality happiness, several reports of this setups harshness exist Yet a few owner comment’s of a “like stock ride quality” also exist. However given the fact that they use a spring stiffness that’s over 100% stiffer then oem, if ride quality is of concern, either hitch a ride in a car equipped with them or make a different choice. In addition, several review’s have been done by people actually having the original more softly sprung Tein Flex coilovers do not take their comments to mean the same as the one using the current product, the original product specs are listed below under Tein Flex JDM.

Tein CS (Monotube constructionad, adjustable dampners )
Special Note: A comfort ride system compare to HKS LS.They are valved and sprung to fulfill their intended mission of offering up improved ride comfort. More specifically their valving will impact the performance they can deliver. And to add, revalving them is extremely expensive if you find they are too soft for you. If you want performance, pick a different Tein offering or pick a different brand.
Spring rates 392/392
Stiffer then oem by F+25% R15%
Transfers +10% roll stiffness to front
The Flex with a higher spring rate would be stiffer than the CS, more track oriented.
 
Reply
Old Jan 25, 2006 | 02:09 PM
  #4  
mkn1620's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Nov 2005
Posts: 536
Likes: 0
so, for the comfortable and smooth. CS will be the one to go?
 
Reply
Old Jan 25, 2006 | 03:00 PM
  #5  
GReddySetGO's Avatar
Registered User
iTrader: (68)
Joined: Oct 2004
Posts: 2,445
Likes: 0
From: Arcadia, CA
Yes.
 
Reply
Old Jan 27, 2006 | 07:51 PM
  #6  
mkn1620's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Nov 2005
Posts: 536
Likes: 0
kewl, thx alot
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KruZZe
New Members Check In
14
Feb 27, 2023 05:04 PM
davizzle
Media Share G35 Coupe V35
23
May 22, 2022 09:26 AM
THMotorsports
Suspension-Vendor
257
Dec 18, 2018 05:43 PM
davizzle
Picture Share
23
Feb 4, 2018 12:41 PM
davizzle
Video Share
5
Jan 31, 2017 04:00 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 05:24 AM.